lkml.org 
[lkml]   [2021]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 2/2] staging: iio: cdc: ad7746: use dt for capacitive channel setup.
On Sat, Apr 24, 2021 at 9:10 AM Jonathan Cameron <jic23@kernel.org> wrote:
>
> On Sun, 18 Apr 2021 19:50:10 -0300
> Lucas Stankus <lucas.p.stankus@gmail.com> wrote:
>
> > Ditch platform_data fields in favor of device tree properties for
> > configuring EXCA and EXCB output pins and setting the capacitive channel
> > excitation level.
> >
> > As this covers all current use cases for the platform_data struct, remove
> > ad7746.h header file since it's no longer needed.
> >
> > Signed-off-by: Lucas Stankus <lucas.p.stankus@gmail.com>
> Hi Lucas,
>
> Just one comment which is that the permille to register value
> is a bit opaque so I think I'd prefer a simple lookup table even though it
> is a bit more code.
>
> Otherwise looks good to me.
>
> Thanks,
>
> Jonathan

Thank you!

> > ---
> >
> > Changes in v2:
> > Previously this change set was composed of two patches, but it lead to
> > regressions between the two. Merging them avoids the unwanted behaviour
> > without having to deal with the special cases.
> >
> > drivers/staging/iio/cdc/ad7746.c | 42 +++++++++++++++-----------------
> > drivers/staging/iio/cdc/ad7746.h | 28 ---------------------
> > 2 files changed, 19 insertions(+), 51 deletions(-)
> > delete mode 100644 drivers/staging/iio/cdc/ad7746.h
> >
> > diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/staging/iio/cdc/ad7746.c
> > index dfd71e99e872..c0e84c1cf4f1 100644
> > --- a/drivers/staging/iio/cdc/ad7746.c
> > +++ b/drivers/staging/iio/cdc/ad7746.c
> > @@ -18,8 +18,6 @@
> > #include <linux/iio/iio.h>
> > #include <linux/iio/sysfs.h>
> >
> > -#include "ad7746.h"
> > -
> > /*
> > * AD7746 Register Definition
> > */
> > @@ -66,7 +64,7 @@
> > #define AD7746_EXCSETUP_NEXCB BIT(4)
> > #define AD7746_EXCSETUP_EXCA BIT(3)
> > #define AD7746_EXCSETUP_NEXCA BIT(2)
> > -#define AD7746_EXCSETUP_EXCLVL(x) (((x) & 0x3) << 0)
> > +#define AD7746_EXCSETUP_EXCLVL(x) (((x) >> 7) & 0x3)
>
> I'd like a comment on this maths, or just use a lookup table instead so
> we don't have to think about it and also enforce exact matches.
> The rounding this results in is a bit odd

To be fair this macro is a bit hack-ish, the permille binding can be 125, 250,
500 or 750, so dividing it by 128 maps these values from 0 to 3, which are the
expected numbers for configuring the device.

I decided to use the bit shift because it was more concise than a lookup table,
but the latter might be more legible, I'll send a v3 with one instead.

>
> >
> > /* Config Register Bit Designations (AD7746_REG_CFG) */
> > #define AD7746_CONF_VTFS_SHIFT 6
> > @@ -676,10 +674,11 @@ static const struct iio_info ad7746_info = {
> > static int ad7746_probe(struct i2c_client *client,
> > const struct i2c_device_id *id)
> > {
> > - struct ad7746_platform_data *pdata = client->dev.platform_data;
> > + struct device *dev = &client->dev;
> > struct ad7746_chip_info *chip;
> > struct iio_dev *indio_dev;
> > unsigned char regval = 0;
> > + unsigned int vdd_permille;
> > int ret = 0;
> >
> > indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
> > @@ -703,28 +702,25 @@ static int ad7746_probe(struct i2c_client *client,
> > indio_dev->num_channels = ARRAY_SIZE(ad7746_channels);
> > indio_dev->modes = INDIO_DIRECT_MODE;
> >
> > - if (pdata) {
> > - if (pdata->exca_en) {
> > - if (pdata->exca_inv_en)
> > - regval |= AD7746_EXCSETUP_NEXCA;
> > - else
> > - regval |= AD7746_EXCSETUP_EXCA;
> > - }
> > -
> > - if (pdata->excb_en) {
> > - if (pdata->excb_inv_en)
> > - regval |= AD7746_EXCSETUP_NEXCB;
> > - else
> > - regval |= AD7746_EXCSETUP_EXCB;
> > - }
> > + if (device_property_read_bool(dev, "adi,exca-output-en")) {
> > + if (device_property_read_bool(dev, "adi,exca-output-invert"))
> > + regval |= AD7746_EXCSETUP_NEXCA;
> > + else
> > + regval |= AD7746_EXCSETUP_EXCA;
> > + }
> >
> > - regval |= AD7746_EXCSETUP_EXCLVL(pdata->exclvl);
> > - } else {
> > - dev_warn(&client->dev, "No platform data? using default\n");
> > - regval = AD7746_EXCSETUP_EXCA | AD7746_EXCSETUP_EXCB |
> > - AD7746_EXCSETUP_EXCLVL(3);
> > + if (device_property_read_bool(dev, "adi,excb-output-en")) {
> > + if (device_property_read_bool(dev, "adi,excb-output-invert"))
> > + regval |= AD7746_EXCSETUP_NEXCB;
> > + else
> > + regval |= AD7746_EXCSETUP_EXCB;
> > }
> >
> > + ret = device_property_read_u32(dev, "adi,excitation-vdd-permille",
> > + &vdd_permille);
> > + if (!ret)
> > + regval |= AD7746_EXCSETUP_EXCLVL(vdd_permille);
> > +
> > ret = i2c_smbus_write_byte_data(chip->client,
> > AD7746_REG_EXC_SETUP, regval);
> > if (ret < 0)
> > diff --git a/drivers/staging/iio/cdc/ad7746.h b/drivers/staging/iio/cdc/ad7746.h
> > deleted file mode 100644
> > index 8bdbd732dbbd..000000000000
> > --- a/drivers/staging/iio/cdc/ad7746.h
> > +++ /dev/null
> > @@ -1,28 +0,0 @@
> > -/* SPDX-License-Identifier: GPL-2.0 */
> > -/*
> > - * AD7746 capacitive sensor driver supporting AD7745, AD7746 and AD7747
> > - *
> > - * Copyright 2011 Analog Devices Inc.
> > - */
> > -
> > -#ifndef IIO_CDC_AD7746_H_
> > -#define IIO_CDC_AD7746_H_
> > -
> > -/*
> > - * TODO: struct ad7746_platform_data needs to go into include/linux/iio
> > - */
> > -
> > -#define AD7466_EXCLVL_0 0 /* +-VDD/8 */
> > -#define AD7466_EXCLVL_1 1 /* +-VDD/4 */
> > -#define AD7466_EXCLVL_2 2 /* +-VDD * 3/8 */
> > -#define AD7466_EXCLVL_3 3 /* +-VDD/2 */
> > -
> > -struct ad7746_platform_data {
> > - unsigned char exclvl; /*Excitation Voltage Level */
> > - bool exca_en; /* enables EXCA pin as the excitation output */
> > - bool exca_inv_en; /* enables /EXCA pin as the excitation output */
> > - bool excb_en; /* enables EXCB pin as the excitation output */
> > - bool excb_inv_en; /* enables /EXCB pin as the excitation output */
> > -};
> > -
> > -#endif /* IIO_CDC_AD7746_H_ */
>

\
 
 \ /
  Last update: 2021-04-26 02:55    [W:0.064 / U:6.472 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site