lkml.org 
[lkml]   [2021]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 11/14] drivers: net: dsa: qca8k: apply switch revision fix
On Sat, Apr 24, 2021 at 06:09:27PM -0700, Florian Fainelli wrote:
>
>
> On 4/24/2021 2:18 PM, Ansuel Smith wrote:
> > On Thu, Apr 22, 2021 at 07:02:37PM -0700, Florian Fainelli wrote:
> >>
> >>
> >> On 4/22/2021 6:47 PM, Ansuel Smith wrote:
> >>> qca8k require special debug value based on the switch revision.
> >>>
> >>> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> >>> ---
> >>> drivers/net/dsa/qca8k.c | 23 +++++++++++++++++++++--
> >>> 1 file changed, 21 insertions(+), 2 deletions(-)
> >>>
> >>> diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
> >>> index 193c269d8ed3..12d2c97d1417 100644
> >>> --- a/drivers/net/dsa/qca8k.c
> >>> +++ b/drivers/net/dsa/qca8k.c
> >>> @@ -909,7 +909,7 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
> >>> {
> >>> const struct qca8k_match_data *data;
> >>> struct qca8k_priv *priv = ds->priv;
> >>> - u32 reg, val;
> >>> + u32 phy, reg, val;
> >>>
> >>> /* get the switches ID from the compatible */
> >>> data = of_device_get_match_data(priv->dev);
> >>> @@ -928,7 +928,26 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
> >>> case 3:
> >>> case 4:
> >>> case 5:
> >>> - /* Internal PHY, nothing to do */
> >>> + /* Internal PHY, apply revision fixup */
> >>> + phy = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
> >>> + switch (priv->switch_revision) {
> >>> + case 1:
> >>> + /* For 100M waveform */
> >>> + qca8k_phy_dbg_write(priv, phy, 0, 0x02ea);
> >>> + /* Turn on Gigabit clock */
> >>> + qca8k_phy_dbg_write(priv, phy, 0x3d, 0x68a0);
> >>> + break;
> >>> +
> >>> + case 2:
> >>> + qca8k_phy_mmd_write(priv, phy, 0x7, 0x3c, 0x0);
> >>> + fallthrough;
> >>> + case 4:
> >>> + qca8k_phy_mmd_write(priv, phy, 0x3, 0x800d, 0x803f);
> >>> + qca8k_phy_dbg_write(priv, phy, 0x3d, 0x6860);
> >>> + qca8k_phy_dbg_write(priv, phy, 0x5, 0x2c46);
> >>> + qca8k_phy_dbg_write(priv, phy, 0x3c, 0x6000);
> >>> + break;
> >>
> >> This would be better done with a PHY driver that is specific to the
> >> integrated PHY found in these switches, it would provide a nice clean
> >> layer and would allow you to expose additional features like cable
> >> tests, PHY statistics/counters, etc.
> >
> > I'm starting to do some work with this and a problem arised. Since these
> > value are based on the switch revision, how can I access these kind of
> > data from the phy driver? It's allowed to declare a phy driver in the
> > dsa directory? (The idea would be to create a qca8k dir with the dsa
> > driver and the dedicated internal phy driver.) This would facilitate the
> > use of normal qca8k_read/write (to access the switch revision from the
> > phy driver) using common function?
>
> The PHY driver should live under drivers/net/phy/ and if you need to
> communicate the switch revision to the PHY driver you can use
> phydev->dev_flags and implement a dsa_switch_ops::get_phy_flags()
> callback and define a custom bitmask.
>
> As far as the read/write operations if your switch implements a custom
> mii_bus for the purpose of doing all of the underlying indirect register
> accesses, then you should be fine. A lot of drivers do that however if
> you want an example of both (communicating something to the PHY driver
> and having a custom MII bus) you can look at drivers/net/dsa/bcm_sf2.c
> for an example.
> --
> Florian

Thanks a lot for the suggestions. Will send v2 to the net-next branch
hoping I did all the correct way.

\
 
 \ /
  Last update: 2021-04-25 03:20    [W:1.967 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site