Messages in this thread | | | From | Steen Hegelund <> | Subject | [PATCH v9 0/3] Adding the Sparx5 Switch Reset Driver | Date | Fri, 16 Apr 2021 10:40:51 +0200 |
| |
This series provides the Microchip Sparx5 Switch Reset Driver
The Sparx5 Switch SoC has a number of components that can be reset individually, but at least the Switch Core needs to be in a well defined state at power on, when any of the Sparx5 drivers starts to access the Switch Core, this reset driver is available.
The reset driver is loaded early via the postcore_initcall interface, and will then be available for the other Sparx5 drivers (SGPIO, SwitchDev etc) that are loaded next, and the first of them to be loaded can perform the one-time Switch Core reset that is needed.
The driver has protection so that the system busses, DDR controller, PCI-E and ARM A53 CPU and a few other subsystems are not touched by the reset.
Sparx5 will no longer use the existing Ocelot chip reset driver, but use this new switch reset driver as it has the reset controller interface that allows the first client to perform the reset on behalf of all the Sparx5 component drivers.
The Sparx5 Chip Register Model can be browsed at this location: https://github.com/microchip-ung/sparx-5_reginfo and the datasheet is available here: https://ww1.microchip.com/downloads/en/DeviceDoc/SparX-5_Family_L2L3_Enterprise_10G_Ethernet_Switches_Datasheet_00003822B.pdf
History:
v8 -> v9 Added reviewed-by tag.
v7 -> v8 Updated the commit descriptions to explain the change from using the existing Ocelot chip reset driver to use a new switch reset driver.
v6 -> v7 Use devm_platform_get_and_ioremap_resource to get the IO range. Rebase on v5.12-rc1
v5 -> v6 Using the existing CPU syscon for reset protection and add a small IO range for the GCB Reset Register.
v4 -> v5 Changed the two syscons into IO ranges and updated the bindings to reflect this change.
v3 -> v4 Added commit message descriptions
v2 -> v3 Removed unused headers Renamed the reset controller dev member. Use regmap_read_poll_timeout instead of polling a function. Used two separate syscon entries in the binding Simplified the syscon error handling. Simplified the devm_reset_controller_register error handling. Moved the contents of the mchp_sparx5_reset_config function into the probe function.
v1 -> v2 Removed debug prints Changed the error handling to save the error code before jumping.
Steen Hegelund (3): dt-bindings: reset: microchip sparx5 reset driver bindings reset: mchp: sparx5: add switch reset driver arm64: dts: reset: add microchip sparx5 switch reset driver
.../bindings/reset/microchip,rst.yaml | 58 +++++++ arch/arm64/boot/dts/microchip/sparx5.dtsi | 7 +- drivers/reset/Kconfig | 8 + drivers/reset/Makefile | 1 + drivers/reset/reset-microchip-sparx5.c | 146 ++++++++++++++++++ 5 files changed, 218 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/reset/microchip,rst.yaml create mode 100644 drivers/reset/reset-microchip-sparx5.c
-- 2.31.1
| |