lkml.org 
[lkml]   [2021]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 4.14 28/68] ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfaces
    Date
    From: Stefan Riedmueller <s.riedmueller@phytec.de>

    [ Upstream commit f57011e72f5fe0421ec7a812beb1b57bdf4bb47f ]

    Setting the vmmc supplies is crucial since otherwise the supplying
    regulators get disabled and the SD interfaces are no longer powered
    which leads to system failures if the system is booted from that SD
    interface.

    Fixes: 1e44d3f880d5 ("ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module")
    Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
    Reviewed-by: Fabio Estevam <festevam@gmail.com>
    Signed-off-by: Shawn Guo <shawnguo@kernel.org>
    Signed-off-by: Sasha Levin <sashal@kernel.org>
    ---
    arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 2 ++
    1 file changed, 2 insertions(+)

    diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
    index 25b0704c6054..d2c31eae9fef 100644
    --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
    +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
    @@ -423,6 +423,7 @@
    pinctrl-0 = <&pinctrl_usdhc2>;
    cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
    wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
    + vmmc-supply = <&vdd_sd1_reg>;
    status = "disabled";
    };

    @@ -432,5 +433,6 @@
    &pinctrl_usdhc3_cdwp>;
    cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
    wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
    + vmmc-supply = <&vdd_sd0_reg>;
    status = "disabled";
    };
    --
    2.30.2


    \
     
     \ /
      Last update: 2021-04-15 17:01    [W:4.229 / U:0.552 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site