lkml.org 
[lkml]   [2021]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 2/7] dt-bindings: media: max9286: Define 'maxim,gpio-poc'
Date
Define a new vendor property in the maxim,max9286 binding schema.

The new property allows to declare that the remote camera
power-over-coax is controlled by one of the MAX9286 gpio lines.

As it is currently not possible to establish a regulator as consumer
of the MAX9286 gpio controller for this purpose, the property allows to
declare that the camera power is controlled by the MAX9286 directly.

The property accepts a gpio-index (0 or 1) and one line polarity
flag as defined by dt-bindings/gpio/gpio.h.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
.../bindings/media/i2c/maxim,max9286.yaml | 71 ++++++++++++++++++-
1 file changed, 70 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
index 0e7162998b77..e2422241b7d0 100644
--- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
@@ -70,6 +70,28 @@ properties:
a remote serializer whose high-threshold noise immunity is not enabled
is 100000 micro volts

+ maxim,gpio-poc:
+ $ref: '/schemas/types.yaml#/definitions/uint32-array'
+ minItems: 2
+ maxItems: 2
+ description: |
+ Index of the MAX9286 gpio output line (0 or 1) that controls Power over
+ Coax to the cameras and its associated polarity flag.
+
+ The property accepts an array of two unsigned integers, the first being
+ the gpio line index (0 or 1) and the second being the gpio line polarity
+ flag (GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW) as defined in
+ <include/dt-bindings/gpio/gpio.h>.
+
+ When the remote cameras power is controlled by one of the MAX9286 gpio
+ lines, this property has to be used to specify which line among the two
+ available ones controls the remote camera power enablement.
+
+ When this property is used it is not possible to register a gpio
+ controller as the gpio lines are controlled directly by the MAX9286 and
+ not available for consumers, nor the 'poc-supply' property should be
+ specified.
+
ports:
$ref: /schemas/graph.yaml#/properties/ports

@@ -182,7 +204,20 @@ required:
- reg
- ports
- i2c-mux
- - gpio-controller
+
+# If 'maxim,gpio-poc' is present, then 'poc-supply' and 'gpio-controller'
+# are not allowed.
+if:
+ required:
+ - maxim,gpio-poc
+then:
+ allOf:
+ - not:
+ required:
+ - poc-supply
+ - not:
+ required:
+ - gpio-controller

additionalProperties: false

@@ -327,4 +362,38 @@ examples:
};
};
};
+
+ /*
+ * Example of a deserializer that controls the camera Power over Coax
+ * through one of its gpio lines.
+ */
+ gmsl-deserializer@6c {
+ compatible = "maxim,max9286";
+ reg = <0x6c>;
+ enable-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+
+ /*
+ * The remote camera power is controlled by MAX9286 GPIO line #0.
+ * No 'poc-supply' nor 'gpio-controller' are specified.
+ */
+ maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
+
+ /*
+ * Do not describe connections as they're the same as in the previous
+ * example.
+ */
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@4 {
+ reg = <4>;
+ };
+ };
+
+ i2c-mux {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
};
--
2.31.1
\
 
 \ /
  Last update: 2021-04-15 14:27    [W:6.337 / U:0.804 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site