lkml.org 
[lkml]   [2021]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 1/3] vDPA/ifcvf: deduce VIRTIO device ID when probe
Date
This commit deduces VIRTIO device ID as device type when probe,
then ifcvf_vdpa_get_device_id() can simply return the ID.
ifcvf_vdpa_get_features() and ifcvf_vdpa_get_config_size()
can work properly based on the device ID.

Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
---
drivers/vdpa/ifcvf/ifcvf_base.h | 1 +
drivers/vdpa/ifcvf/ifcvf_main.c | 30 ++++++++++++++++++------------
2 files changed, 19 insertions(+), 12 deletions(-)

diff --git a/drivers/vdpa/ifcvf/ifcvf_base.h b/drivers/vdpa/ifcvf/ifcvf_base.h
index b2eeb16b9c2c..1c04cd256fa7 100644
--- a/drivers/vdpa/ifcvf/ifcvf_base.h
+++ b/drivers/vdpa/ifcvf/ifcvf_base.h
@@ -84,6 +84,7 @@ struct ifcvf_hw {
u32 notify_off_multiplier;
u64 req_features;
u64 hw_features;
+ u32 dev_type;
struct virtio_pci_common_cfg __iomem *common_cfg;
void __iomem *net_cfg;
struct vring_info vring[IFCVF_MAX_QUEUE_PAIRS * 2];
diff --git a/drivers/vdpa/ifcvf/ifcvf_main.c b/drivers/vdpa/ifcvf/ifcvf_main.c
index 44d7586019da..469a9b5737b7 100644
--- a/drivers/vdpa/ifcvf/ifcvf_main.c
+++ b/drivers/vdpa/ifcvf/ifcvf_main.c
@@ -323,19 +323,9 @@ static u32 ifcvf_vdpa_get_generation(struct vdpa_device *vdpa_dev)

static u32 ifcvf_vdpa_get_device_id(struct vdpa_device *vdpa_dev)
{
- struct ifcvf_adapter *adapter = vdpa_to_adapter(vdpa_dev);
- struct pci_dev *pdev = adapter->pdev;
- u32 ret = -ENODEV;
-
- if (pdev->device < 0x1000 || pdev->device > 0x107f)
- return ret;
-
- if (pdev->device < 0x1040)
- ret = pdev->subsystem_device;
- else
- ret = pdev->device - 0x1040;
+ struct ifcvf_hw *vf = vdpa_to_vf(vdpa_dev);

- return ret;
+ return vf->dev_type;
}

static u32 ifcvf_vdpa_get_vendor_id(struct vdpa_device *vdpa_dev)
@@ -466,6 +456,22 @@ static int ifcvf_probe(struct pci_dev *pdev, const struct pci_device_id *id)
pci_set_drvdata(pdev, adapter);

vf = &adapter->vf;
+
+ /* This drirver drives both modern virtio devices and transitional
+ * devices in modern mode.
+ * vDPA requires feature bit VIRTIO_F_ACCESS_PLATFORM,
+ * so legacy devices and transitional devices in legacy
+ * mode will not work for vDPA, this driver will not
+ * drive devices with legacy interface.
+ */
+ if (pdev->device < 0x1000 || pdev->device > 0x107f)
+ return -EOPNOTSUPP;
+
+ if (pdev->device < 0x1040)
+ vf->dev_type = pdev->subsystem_device;
+ else
+ vf->dev_type = pdev->device - 0x1040;
+
vf->base = pcim_iomap_table(pdev);

adapter->pdev = pdev;
--
2.27.0
\
 
 \ /
  Last update: 2021-04-15 12:01    [W:0.090 / U:0.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site