lkml.org 
[lkml]   [2021]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 29/33] dt-bindings: media: atmel-isc: convert to yaml
Date
Convert the Atmel ISC to yaml binding format.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
Changes in v4:
- added '|' at description to maintain line breaks

.../devicetree/bindings/media/atmel,isc.yaml | 115 ++++++++++++++++++
.../devicetree/bindings/media/atmel-isc.txt | 65 ----------
2 files changed, 115 insertions(+), 65 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/atmel,isc.yaml
delete mode 100644 Documentation/devicetree/bindings/media/atmel-isc.txt

diff --git a/Documentation/devicetree/bindings/media/atmel,isc.yaml b/Documentation/devicetree/bindings/media/atmel,isc.yaml
new file mode 100644
index 000000000000..a29c11667c82
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/atmel,isc.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright (C) 2016-2021 Microchip Technology, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/atmel,isc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Image Sensor Controller (ISC)
+
+maintainers:
+ - Eugen Hristev <eugen.hristev@microchip.com>
+
+description: |
+ The Image Sensor Controller (ISC) device provides the video input capabilities for the
+ Atmel/Microchip AT91 SAMA family of devices.
+
+ The ISC has a single parallel input that supports RAW Bayer, RGB or YUV video,
+ with both external synchronization and BT.656 synchronization for the latter.
+
+properties:
+ compatible:
+ const: atmel,sama5d2-isc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 3
+ maxItems: 3
+
+ clock-names:
+ items:
+ - const: hclock
+ - const: iscck
+ - const: gck
+
+ '#clock-cells':
+ const: 0
+
+ clock-output-names:
+ const: isc-mck
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Input port node, single endpoint describing the input pad.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+
+ properties:
+ remote-endpoint: true
+
+ bus-width:
+ enum: [8, 9, 10, 11, 12]
+ default: 12
+
+ hsync-active:
+ enum: [0, 1]
+ default: 1
+
+ vsync-active:
+ enum: [0, 1]
+ default: 1
+
+ pclk-sample:
+ enum: [0, 1]
+ default: 1
+
+ required:
+ - remote-endpoint
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+ - clock-output-names
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ isc: isc@f0008000 {
+ compatible = "atmel,sama5d2-isc";
+ reg = <0xf0008000 0x4000>;
+ interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
+ clocks = <&isc_clk>, <&iscck>, <&isc_gclk>;
+ clock-names = "hclock", "iscck", "gck";
+ #clock-cells = <0>;
+ clock-output-names = "isc-mck";
+
+ port {
+ isc_0: endpoint {
+ remote-endpoint = <&ov7740_0>;
+ hsync-active = <1>;
+ vsync-active = <0>;
+ pclk-sample = <1>;
+ bus-width = <8>;
+ };
+ };
+ };
+
diff --git a/Documentation/devicetree/bindings/media/atmel-isc.txt b/Documentation/devicetree/bindings/media/atmel-isc.txt
deleted file mode 100644
index bbe0e87c6188..000000000000
--- a/Documentation/devicetree/bindings/media/atmel-isc.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-Atmel Image Sensor Controller (ISC)
-----------------------------------------------
-
-Required properties for ISC:
-- compatible
- Must be "atmel,sama5d2-isc".
-- reg
- Physical base address and length of the registers set for the device.
-- interrupts
- Should contain IRQ line for the ISC.
-- clocks
- List of clock specifiers, corresponding to entries in
- the clock-names property;
- Please refer to clock-bindings.txt.
-- clock-names
- Required elements: "hclock", "iscck", "gck".
-- #clock-cells
- Should be 0.
-- clock-output-names
- Should be "isc-mck".
-- pinctrl-names, pinctrl-0
- Please refer to pinctrl-bindings.txt.
-
-ISC supports a single port node with parallel bus. It should contain one
-'port' child node with child 'endpoint' node. Please refer to the bindings
-defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-isc: isc@f0008000 {
- compatible = "atmel,sama5d2-isc";
- reg = <0xf0008000 0x4000>;
- interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
- clocks = <&isc_clk>, <&iscck>, <&isc_gclk>;
- clock-names = "hclock", "iscck", "gck";
- #clock-cells = <0>;
- clock-output-names = "isc-mck";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>;
-
- port {
- isc_0: endpoint {
- remote-endpoint = <&ov7740_0>;
- hsync-active = <1>;
- vsync-active = <0>;
- pclk-sample = <1>;
- };
- };
-};
-
-i2c1: i2c@fc028000 {
- ov7740: camera@21 {
- compatible = "ovti,ov7740";
- reg = <0x21>;
- clocks = <&isc>;
- clock-names = "xvclk";
- assigned-clocks = <&isc>;
- assigned-clock-rates = <24000000>;
-
- port {
- ov7740_0: endpoint {
- remote-endpoint = <&isc_0>;
- };
- };
- };
-};
--
2.25.1
\
 
 \ /
  Last update: 2021-04-15 10:58    [W:0.221 / U:2.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site