lkml.org 
[lkml]   [2021]   [Apr]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v6 5/5] drm/bridge: anx7625: add HDMI audio function
Hey Xin,

This patch looks good to me.

Reviewed-by: Robert Foss <robert.foss@linaro.org>

On Fri, 19 Mar 2021 at 07:35, Xin Ji <xji@analogixsemi.com> wrote:
>
> Add audio HDMI codec function support, enable it through device true flag
> "analogix,audio-enable".
>
> Reported-by: kernel test robot <lkp@intel.com>
> Signed-off-by: Xin Ji <xji@analogixsemi.com>
> ---
> drivers/gpu/drm/bridge/analogix/anx7625.c | 227 ++++++++++++++++++++++
> drivers/gpu/drm/bridge/analogix/anx7625.h | 5 +
> 2 files changed, 232 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> index b424a570effa..02bb169d9c57 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> @@ -30,6 +30,8 @@
> #include <drm/drm_print.h>
> #include <drm/drm_probe_helper.h>
>
> +#include <sound/hdmi-codec.h>
> +
> #include <video/display_timing.h>
>
> #include "anx7625.h"
> @@ -150,6 +152,20 @@ static int anx7625_write_and(struct anx7625_data *ctx,
> return anx7625_reg_write(ctx, client, offset, (val & (mask)));
> }
>
> +static int anx7625_write_and_or(struct anx7625_data *ctx,
> + struct i2c_client *client,
> + u8 offset, u8 and_mask, u8 or_mask)
> +{
> + int val;
> +
> + val = anx7625_reg_read(ctx, client, offset);
> + if (val < 0)
> + return val;
> +
> + return anx7625_reg_write(ctx, client,
> + offset, (val & and_mask) | (or_mask));
> +}
> +
> static int anx7625_config_bit_matrix(struct anx7625_data *ctx)
> {
> int i, ret;
> @@ -1498,6 +1514,9 @@ static int anx7625_parse_dt(struct device *dev,
> else
> DRM_DEV_DEBUG_DRIVER(dev, "found MIPI DSI host node.\n");
>
> + if (of_property_read_bool(np, "analogix,audio-enable"))
> + pdata->audio_en = 1;
> +
> ret = drm_of_find_panel_or_bridge(np, 1, 0, &panel, NULL);
> if (ret < 0) {
> if (ret == -ENODEV)
> @@ -1568,6 +1587,208 @@ static enum drm_connector_status anx7625_sink_detect(struct anx7625_data *ctx)
> connector_status_disconnected;
> }
>
> +static int anx7625_audio_hw_params(struct device *dev, void *data,
> + struct hdmi_codec_daifmt *fmt,
> + struct hdmi_codec_params *params)
> +{
> + struct anx7625_data *ctx = dev_get_drvdata(dev);
> + int wl, ch, rate;
> + int ret = 0;
> +
> + if (fmt->fmt != HDMI_DSP_A) {
> + DRM_DEV_ERROR(dev, "only supports DSP_A\n");
> + return -EINVAL;
> + }
> +
> + DRM_DEV_DEBUG_DRIVER(dev, "setting %d Hz, %d bit, %d channels\n",
> + params->sample_rate, params->sample_width,
> + params->cea.channels);
> +
> + ret |= anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
> + AUDIO_CHANNEL_STATUS_6,
> + ~I2S_SLAVE_MODE,
> + TDM_SLAVE_MODE);
> +
> + /* Word length */
> + switch (params->sample_width) {
> + case 16:
> + wl = AUDIO_W_LEN_16_20MAX;
> + break;
> + case 18:
> + wl = AUDIO_W_LEN_18_20MAX;
> + break;
> + case 20:
> + wl = AUDIO_W_LEN_20_20MAX;
> + break;
> + case 24:
> + wl = AUDIO_W_LEN_24_24MAX;
> + break;
> + default:
> + DRM_DEV_DEBUG_DRIVER(dev, "wordlength: %d bit not support",
> + params->sample_width);
> + return -EINVAL;
> + }
> + ret |= anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
> + AUDIO_CHANNEL_STATUS_5,
> + 0xf0, wl);
> +
> + /* Channel num */
> + switch (params->cea.channels) {
> + case 2:
> + ch = I2S_CH_2;
> + break;
> + case 4:
> + ch = TDM_CH_4;
> + break;
> + case 6:
> + ch = TDM_CH_6;
> + break;
> + case 8:
> + ch = TDM_CH_8;
> + break;
> + default:
> + DRM_DEV_DEBUG_DRIVER(dev, "channel number: %d not support",
> + params->cea.channels);
> + return -EINVAL;
> + }
> + ret |= anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
> + AUDIO_CHANNEL_STATUS_6, 0x1f, ch << 5);
> + if (ch > I2S_CH_2)
> + ret |= anx7625_write_or(ctx, ctx->i2c.tx_p2_client,
> + AUDIO_CHANNEL_STATUS_6, AUDIO_LAYOUT);
> + else
> + ret |= anx7625_write_and(ctx, ctx->i2c.tx_p2_client,
> + AUDIO_CHANNEL_STATUS_6, ~AUDIO_LAYOUT);
> +
> + /* FS */
> + switch (params->sample_rate) {
> + case 32000:
> + rate = AUDIO_FS_32K;
> + break;
> + case 44100:
> + rate = AUDIO_FS_441K;
> + break;
> + case 48000:
> + rate = AUDIO_FS_48K;
> + break;
> + case 88200:
> + rate = AUDIO_FS_882K;
> + break;
> + case 96000:
> + rate = AUDIO_FS_96K;
> + break;
> + case 176400:
> + rate = AUDIO_FS_1764K;
> + break;
> + case 192000:
> + rate = AUDIO_FS_192K;
> + break;
> + default:
> + DRM_DEV_DEBUG_DRIVER(dev, "sample rate: %d not support",
> + params->sample_rate);
> + return -EINVAL;
> + }
> + ret |= anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
> + AUDIO_CHANNEL_STATUS_4,
> + 0xf0, rate);
> + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
> + AP_AV_STATUS, AP_AUDIO_CHG);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "IO error : config audio.\n");
> + return -EIO;
> + }
> +
> + return 0;
> +}
> +
> +static void anx7625_audio_shutdown(struct device *dev, void *data)
> +{
> + DRM_DEV_DEBUG_DRIVER(dev, "stop audio\n");
> +}
> +
> +static int anx7625_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
> + struct device_node *endpoint)
> +{
> + struct of_endpoint of_ep;
> + int ret;
> +
> + ret = of_graph_parse_endpoint(endpoint, &of_ep);
> + if (ret < 0)
> + return ret;
> +
> + /*
> + * HDMI sound should be located at external DPI port
> + * Didn't have good way to check where is internal(DSI)
> + * or external(DPI) bridge
> + */
> + return 0;
> +}
> +
> +static void
> +anx7625_audio_update_connector_status(struct anx7625_data *ctx,
> + enum drm_connector_status status)
> +{
> + if (ctx->plugged_cb && ctx->codec_dev) {
> + ctx->plugged_cb(ctx->codec_dev,
> + status == connector_status_connected);
> + }
> +}
> +
> +static int anx7625_audio_hook_plugged_cb(struct device *dev, void *data,
> + hdmi_codec_plugged_cb fn,
> + struct device *codec_dev)
> +{
> + struct anx7625_data *ctx = data;
> +
> + ctx->plugged_cb = fn;
> + ctx->codec_dev = codec_dev;
> + anx7625_audio_update_connector_status(ctx, anx7625_sink_detect(ctx));
> +
> + return 0;
> +}
> +
> +static const struct hdmi_codec_ops anx7625_codec_ops = {
> + .hw_params = anx7625_audio_hw_params,
> + .audio_shutdown = anx7625_audio_shutdown,
> + .get_dai_id = anx7625_hdmi_i2s_get_dai_id,
> + .hook_plugged_cb = anx7625_audio_hook_plugged_cb,
> +};
> +
> +static void anx7625_unregister_audio(struct anx7625_data *ctx)
> +{
> + struct device *dev = &ctx->client->dev;
> +
> + if (ctx->audio_pdev) {
> + platform_device_unregister(ctx->audio_pdev);
> + ctx->audio_pdev = NULL;
> + }
> +
> + DRM_DEV_DEBUG_DRIVER(dev, "unbound to %s", HDMI_CODEC_DRV_NAME);
> +}
> +
> +static int anx7625_register_audio(struct device *dev, struct anx7625_data *ctx)
> +{
> + struct hdmi_codec_pdata codec_data = {
> + .ops = &anx7625_codec_ops,
> + .max_i2s_channels = 8,
> + .i2s = 1,
> + .data = ctx,
> + };
> +
> + ctx->audio_pdev = platform_device_register_data(dev,
> + HDMI_CODEC_DRV_NAME,
> + PLATFORM_DEVID_AUTO,
> + &codec_data,
> + sizeof(codec_data));
> +
> + if (IS_ERR(ctx->audio_pdev))
> + return IS_ERR(ctx->audio_pdev);
> +
> + DRM_DEV_DEBUG_DRIVER(dev, "bound to %s", HDMI_CODEC_DRV_NAME);
> +
> + return 0;
> +}
> +
> static int anx7625_attach_dsi(struct anx7625_data *ctx)
> {
> struct mipi_dsi_device *dsi;
> @@ -2064,6 +2285,9 @@ static int anx7625_i2c_probe(struct i2c_client *client,
> DRM_MODE_CONNECTOR_DisplayPort;
> drm_bridge_add(&platform->bridge);
>
> + if (platform->pdata.audio_en)
> + anx7625_register_audio(dev, platform);
> +
> DRM_DEV_DEBUG_DRIVER(dev, "probe done\n");
>
> return 0;
> @@ -2089,6 +2313,9 @@ static int anx7625_i2c_remove(struct i2c_client *client)
>
> anx7625_unregister_i2c_dummy_clients(platform);
>
> + if (platform->pdata.audio_en)
> + anx7625_unregister_audio(platform);
> +
> kfree(platform);
> return 0;
> }
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h
> index c6f93e4df0ed..d6be2a83fad9 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.h
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h
> @@ -111,6 +111,7 @@
> #define AUDIO_CHANNEL_STATUS_6 0xd5
> #define TDM_SLAVE_MODE 0x10
> #define I2S_SLAVE_MODE 0x08
> +#define AUDIO_LAYOUT 0x01
>
> #define AUDIO_CONTROL_REGISTER 0xe6
> #define TDM_TIMING_MODE 0x08
> @@ -400,6 +401,7 @@ struct anx7625_platform_data {
> int intp_irq;
> int is_dpi;
> int mipi_lanes;
> + int audio_en;
> int dp_lane0_swing_reg_cnt;
> int lane0_reg_data[DP_TX_SWING_REG_CNT];
> int dp_lane1_swing_reg_cnt;
> @@ -420,6 +422,7 @@ struct anx7625_i2c_client {
>
> struct anx7625_data {
> struct anx7625_platform_data pdata;
> + struct platform_device *audio_pdev;
> atomic_t power_status;
> int hpd_status;
> int hpd_high_cnt;
> @@ -429,6 +432,8 @@ struct anx7625_data {
> struct anx7625_i2c_client i2c;
> struct i2c_client *last_client;
> struct s_edid_data slimport_edid_p;
> + struct device *codec_dev;
> + hdmi_codec_plugged_cb plugged_cb;
> struct work_struct work;
> struct workqueue_struct *workqueue;
> char edid_block;
> --
> 2.25.1
>

\
 
 \ /
  Last update: 2021-04-01 19:50    [W:0.177 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site