lkml.org 
[lkml]   [2021]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC PATCH 2/6] clk: sifive: Use reset-simple in prci driver for PCIe driver
Philipp Zabel <p.zabel@pengutronix.de> 於 2021年3月4日 週四 下午7:58寫道:
>
> On Tue, 2021-03-02 at 18:59 +0800, Greentime Hu wrote:
> > We use reset-simple in this patch so that pcie driver can use
> > devm_reset_control_get() to get this reset data structure and use
> > reset_control_deassert() to deassert pcie_power_up_rst_n.
> >
> > Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
> > ---
> > drivers/clk/sifive/Kconfig | 2 ++
> > drivers/clk/sifive/sifive-prci.c | 14 ++++++++++++++
> > drivers/clk/sifive/sifive-prci.h | 4 ++++
> > drivers/reset/Kconfig | 3 ++-
> > 4 files changed, 22 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/clk/sifive/Kconfig b/drivers/clk/sifive/Kconfig
> > index 1c14eb20c066..9132c3c4aa86 100644
> > --- a/drivers/clk/sifive/Kconfig
> > +++ b/drivers/clk/sifive/Kconfig
> > @@ -10,6 +10,8 @@ if CLK_SIFIVE
> >
> > config CLK_SIFIVE_PRCI
> > bool "PRCI driver for SiFive SoCs"
> > + select RESET_CONTROLLER
> > + select RESET_SIMPLE
> > select CLK_ANALOGBITS_WRPLL_CLN28HPC
> > help
> > Supports the Power Reset Clock interface (PRCI) IP block found in
> > diff --git a/drivers/clk/sifive/sifive-prci.c b/drivers/clk/sifive/sifive-prci.c
> > index baf7313dac92..925affc6de55 100644
> > --- a/drivers/clk/sifive/sifive-prci.c
> > +++ b/drivers/clk/sifive/sifive-prci.c
> > @@ -583,7 +583,21 @@ static int sifive_prci_probe(struct platform_device *pdev)
> > if (IS_ERR(pd->va))
> > return PTR_ERR(pd->va);
> >
> > + pd->reset.rcdev.owner = THIS_MODULE;
> > + pd->reset.rcdev.nr_resets = PRCI_RST_NR;
> > + pd->reset.rcdev.ops = &reset_simple_ops;
> > + pd->reset.rcdev.of_node = pdev->dev.of_node;
> > + pd->reset.active_low = true;
> > + pd->reset.membase = pd->va + PRCI_DEVICESRESETREG_OFFSET;
> > + spin_lock_init(&pd->reset.lock);
> > +
> > + r = devm_reset_controller_register(&pdev->dev, &pd->reset.rcdev);
> > + if (r) {
> > + dev_err(dev, "could not register reset controller: %d\n", r);
> > + return r;
> > + }
> > r = __prci_register_clocks(dev, pd, desc);
> > +
>
> Accidental whitespace?
>
> Otherwise,
>
> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>

Thank you, Philipp.
Yes, it is an accidental whitespace. I'll remove it in my next version patch.

\
 
 \ /
  Last update: 2021-03-09 08:25    [W:0.052 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site