lkml.org 
[lkml]   [2021]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] Input: elan_i2c - Reduce the resume time for new dev ices
Hi Jingle,

On Fri, Mar 05, 2021 at 09:24:05AM +0800, jingle wrote:
> HI Dmitry:
>
> In this case (in the newer parts behavior regarding need to reset after
> powering them on), it is consistent with the original driver behavior with
> any new or old device
> (be called data->ops->initialize(client) : usleep(100) , etc.. , because
> this times "data->quirks" is equal 0 at probe state.)

You misunderstood my question. I was asking what specifically, if
anything, was changed in the firmware to allow skipping reset/sleep part
of device initialization on newer parts during resume process. Because
of there were no specific changes I would say let's not do a quirk and
change the driver to skip reset on resume.

Thanks.

--
Dmitry

\
 
 \ /
  Last update: 2021-03-05 02:33    [W:0.065 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site