lkml.org 
[lkml]   [2021]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFT PATCH v3 18/27] tty: serial: samsung_tty: Separate S3C64XX ops structure
Date
Instead of patching a single global ops structure depending on the port
type, use a separate s3c64xx_serial_ops for the S3C64XX type. This
allows us to mark the structures as const.

Also split out s3c64xx_serial_shutdown into a separate function now that
we have a separate ops structure; this avoids excessive branching
control flow and mirrors s3c64xx_serial_startup. tx_claimed and
rx_claimed are only used in the S3C24XX functions.

Signed-off-by: Hector Martin <marcan@marcan.st>
---
drivers/tty/serial/samsung_tty.c | 71 ++++++++++++++++++++++++--------
1 file changed, 54 insertions(+), 17 deletions(-)

diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 8ae3e03fbd8c..78dc6e9240fb 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -1098,27 +1098,36 @@ static void s3c24xx_serial_shutdown(struct uart_port *port)
struct s3c24xx_uart_port *ourport = to_ourport(port);

if (ourport->tx_claimed) {
- if (!s3c24xx_serial_has_interrupt_mask(port))
- free_irq(ourport->tx_irq, ourport);
+ free_irq(ourport->tx_irq, ourport);
ourport->tx_enabled = 0;
ourport->tx_claimed = 0;
ourport->tx_mode = 0;
}

if (ourport->rx_claimed) {
- if (!s3c24xx_serial_has_interrupt_mask(port))
- free_irq(ourport->rx_irq, ourport);
+ free_irq(ourport->rx_irq, ourport);
ourport->rx_claimed = 0;
ourport->rx_enabled = 0;
}

- /* Clear pending interrupts and mask all interrupts */
- if (s3c24xx_serial_has_interrupt_mask(port)) {
- free_irq(port->irq, ourport);
+ if (ourport->dma)
+ s3c24xx_serial_release_dma(ourport);

- wr_regl(port, S3C64XX_UINTP, 0xf);
- wr_regl(port, S3C64XX_UINTM, 0xf);
- }
+ ourport->tx_in_progress = 0;
+}
+
+static void s3c64xx_serial_shutdown(struct uart_port *port)
+{
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
+
+ ourport->tx_enabled = 0;
+ ourport->tx_mode = 0;
+ ourport->rx_enabled = 0;
+
+ free_irq(port->irq, ourport);
+
+ wr_regl(port, S3C64XX_UINTP, 0xf);
+ wr_regl(port, S3C64XX_UINTM, 0xf);

if (ourport->dma)
s3c24xx_serial_release_dma(ourport);
@@ -1193,9 +1202,7 @@ static int s3c64xx_serial_startup(struct uart_port *port)

/* For compatibility with s3c24xx Soc's */
ourport->rx_enabled = 1;
- ourport->rx_claimed = 1;
ourport->tx_enabled = 0;
- ourport->tx_claimed = 1;

spin_lock_irqsave(&port->lock, flags);

@@ -1608,7 +1615,7 @@ static void s3c24xx_serial_put_poll_char(struct uart_port *port,
unsigned char c);
#endif

-static struct uart_ops s3c24xx_serial_ops = {
+static const struct uart_ops s3c24xx_serial_ops = {
.pm = s3c24xx_serial_pm,
.tx_empty = s3c24xx_serial_tx_empty,
.get_mctrl = s3c24xx_serial_get_mctrl,
@@ -1631,6 +1638,29 @@ static struct uart_ops s3c24xx_serial_ops = {
#endif
};

+static const struct uart_ops s3c64xx_serial_ops = {
+ .pm = s3c24xx_serial_pm,
+ .tx_empty = s3c24xx_serial_tx_empty,
+ .get_mctrl = s3c24xx_serial_get_mctrl,
+ .set_mctrl = s3c24xx_serial_set_mctrl,
+ .stop_tx = s3c24xx_serial_stop_tx,
+ .start_tx = s3c24xx_serial_start_tx,
+ .stop_rx = s3c24xx_serial_stop_rx,
+ .break_ctl = s3c24xx_serial_break_ctl,
+ .startup = s3c64xx_serial_startup,
+ .shutdown = s3c64xx_serial_shutdown,
+ .set_termios = s3c24xx_serial_set_termios,
+ .type = s3c24xx_serial_type,
+ .release_port = s3c24xx_serial_release_port,
+ .request_port = s3c24xx_serial_request_port,
+ .config_port = s3c24xx_serial_config_port,
+ .verify_port = s3c24xx_serial_verify_port,
+#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL)
+ .poll_get_char = s3c24xx_serial_get_poll_char,
+ .poll_put_char = s3c24xx_serial_put_poll_char,
+#endif
+};
+
static struct uart_driver s3c24xx_uart_drv = {
.owner = THIS_MODULE,
.driver_name = "s3c2410_serial",
@@ -1868,10 +1898,6 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
/* setup info for port */
port->dev = &platdev->dev;

- /* Startup sequence is different for s3c64xx and higher SoC's */
- if (s3c24xx_serial_has_interrupt_mask(port))
- s3c24xx_serial_ops.startup = s3c64xx_serial_startup;
-
port->uartclk = 1;

if (cfg->uart_flags & UPF_CONS_FLOW) {
@@ -2019,6 +2045,17 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
dev_get_platdata(&pdev->dev) :
ourport->drv_data->def_cfg;

+ switch (ourport->info->type) {
+ case PORT_S3C2410:
+ case PORT_S3C2412:
+ case PORT_S3C2440:
+ ourport->port.ops = &s3c24xx_serial_ops;
+ break;
+ case PORT_S3C6400:
+ ourport->port.ops = &s3c64xx_serial_ops;
+ break;
+ }
+
if (np) {
of_property_read_u32(np,
"samsung,uart-fifosize", &ourport->port.fifosize);
--
2.30.0
\
 
 \ /
  Last update: 2021-03-04 23:10    [W:0.510 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site