lkml.org 
[lkml]   [2021]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 4/6] i2c: mpc: make interrupt mandatory and remove polling code
Date
All the in-tree dts files that use one of the compatible strings from
i2c-mpc.c provide an interrupt property. By making this mandatory we
can simplify the code.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
drivers/i2c/busses/i2c-mpc.c | 51 ++++++++++++++----------------------
1 file changed, 19 insertions(+), 32 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 6a0d55e9e8e3..5b746a898e8e 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -123,37 +123,21 @@ static void mpc_i2c_fixup(struct mpc_i2c *i2c)

static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
{
- unsigned long orig_jiffies = jiffies;
u32 cmd_err;
- int result = 0;
+ int result;

- if (!i2c->irq) {
- while (!(readb(i2c->base + MPC_I2C_SR) & CSR_MIF)) {
- schedule();
- if (time_after(jiffies, orig_jiffies + timeout)) {
- dev_dbg(i2c->dev, "timeout\n");
- writeccr(i2c, 0);
- result = -ETIMEDOUT;
- break;
- }
- }
- cmd_err = readb(i2c->base + MPC_I2C_SR);
- writeb(0, i2c->base + MPC_I2C_SR);
- } else {
- /* Interrupt mode */
- result = wait_event_timeout(i2c->queue,
+ result = wait_event_timeout(i2c->queue,
(i2c->interrupt & CSR_MIF), timeout);

- if (unlikely(!(i2c->interrupt & CSR_MIF))) {
- dev_dbg(i2c->dev, "wait timeout\n");
- writeccr(i2c, 0);
- result = -ETIMEDOUT;
- }
-
- cmd_err = i2c->interrupt;
- i2c->interrupt = 0;
+ if (unlikely(!(i2c->interrupt & CSR_MIF))) {
+ dev_dbg(i2c->dev, "wait timeout\n");
+ writeccr(i2c, 0);
+ result = -ETIMEDOUT;
}

+ cmd_err = i2c->interrupt;
+ i2c->interrupt = 0;
+
if (result < 0)
return result;

@@ -694,13 +678,16 @@ static int fsl_i2c_probe(struct platform_device *op)
}

i2c->irq = irq_of_parse_and_map(op->dev.of_node, 0);
- if (i2c->irq) { /* no i2c->irq implies polling */
- result = request_irq(i2c->irq, mpc_i2c_isr,
- IRQF_SHARED, "i2c-mpc", i2c);
- if (result < 0) {
- dev_err(i2c->dev, "failed to attach interrupt\n");
- goto fail_request;
- }
+ if (i2c->irq < 0) {
+ result = i2c->irq;
+ goto fail_map;
+ }
+
+ result = request_irq(i2c->irq, mpc_i2c_isr,
+ IRQF_SHARED, "i2c-mpc", i2c);
+ if (result < 0) {
+ dev_err(i2c->dev, "failed to attach interrupt\n");
+ goto fail_request;
}

/*
--
2.31.0
\
 
 \ /
  Last update: 2021-03-29 03:54    [W:0.129 / U:1.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site