lkml.org 
[lkml]   [2021]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/4] rtc:abx80x: Enable xt digital calibration
Date
The XT digital calibration feature allows to improve the RTC accuracy,
using a Distributed Digital Calibration function.
See ch. 5.9.1 of AB08XX Series Ultra Low Power RTC IC User's Guide
https://abracon.com/realtimeclock/AB08XX-Application-Manual.pdf

Signed-off-by: Kirill Kapranov <kirill.kapranov@compulab.co.il>
---
drivers/rtc/rtc-abx80x.c | 145 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 145 insertions(+)

diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
index 153d89b56da9..e13fa88e87a5 100644
--- a/drivers/rtc/rtc-abx80x.c
+++ b/drivers/rtc/rtc-abx80x.c
@@ -54,6 +54,9 @@
#define ABX8XX_REG_SQW 0x13
#define ABX8XX_SQW_MODE_BITS 5

+#define ABX8XX_REG_CAL_XT 0x14
+#define ABX8XX_CAL_XT_OFFSETX_MASK GENMASK(6, 0)
+
#define ABX8XX_REG_CD_TIMER_CTL 0x18

#define ABX8XX_REG_OSC 0x1c
@@ -120,6 +123,22 @@ struct abx80x_priv {
struct watchdog_device wdog;
};

+union abx8xx_reg_cal_xt {
+ struct {
+ int offsetx:7;
+ unsigned int cmdx:1;
+ };
+ int val;
+} __packed;
+
+union abx8xx_reg_oss {
+ struct {
+ int:6;
+ unsigned int xtcal:2;
+ };
+ int val;
+} __packed;
+
union abx8xx_reg_sqw {
struct {
unsigned int sqws:5;
@@ -498,6 +517,123 @@ static ssize_t oscillator_show(struct device *dev,

static DEVICE_ATTR_RW(oscillator);

+static const int xt_freq_nom = 32768000; //Nominal XT frequency 32 kHz in mHz
+
+static int xt_frequency_set(struct i2c_client *client, u32 xt_freq)
+{
+ int retval;
+ long Adj;
+ union abx8xx_reg_cal_xt reg_cal_xt;
+ union abx8xx_reg_oss reg_oss;
+
+ retval = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSS);
+ if (retval < 0)
+ goto err;
+ reg_oss.val = retval;
+
+ Adj = (xt_freq_nom - (int)xt_freq) * 16 / 1000;
+ if (Adj < -320) {
+ dev_err(&client->dev,
+ "The XT oscillator is too fast to be adjusted\n");
+ return -ERANGE;
+ } else if (Adj < -256) {
+ reg_oss.xtcal = 3;
+ reg_cal_xt.cmdx = 1;
+ reg_cal_xt.offsetx = (Adj + 192) / 2;
+ } else if (Adj < -192) {
+ reg_oss.xtcal = 3;
+ reg_cal_xt.cmdx = 0;
+ reg_cal_xt.offsetx = Adj + 192;
+ } else if (Adj < -128) {
+ reg_oss.xtcal = 2;
+ reg_cal_xt.cmdx = 0;
+ reg_cal_xt.offsetx = Adj + 128;
+ } else if (Adj < -64) {
+ reg_oss.xtcal = 1;
+ reg_cal_xt.cmdx = 0;
+ reg_cal_xt.offsetx = Adj + 64;
+ } else if (Adj < 64) {
+ reg_oss.xtcal = 0;
+ reg_cal_xt.cmdx = 0;
+ reg_cal_xt.offsetx = Adj;
+ } else if (Adj < 128) {
+ reg_oss.xtcal = 0;
+ reg_cal_xt.cmdx = 1;
+ reg_cal_xt.offsetx = Adj / 2;
+ } else {
+ dev_err(&client->dev,
+ "The XT oscillator is too slow to be adjusted\n");
+ return -ERANGE;
+ }
+
+ retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSS,
+ reg_oss.val);
+ if (retval < 0)
+ goto err;
+
+ retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_CAL_XT,
+ reg_cal_xt.val);
+ if (retval < 0)
+ goto err;
+
+ return 0;
+err:
+ dev_err(&client->dev, "Failed to access calibration data\n");
+ return retval;
+}
+
+static ssize_t xt_frequency_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int retval;
+ unsigned long xt_freq;
+
+ retval = kstrtoul(buf, 10, &xt_freq);
+ if (retval < 0) {
+ dev_err(dev, "Invalid value of oscillator frequency\n");
+ return -EINVAL;
+ }
+
+ dev_info(dev, "Computed xt osc drift is %li ppm\n",
+ 1000000l * ((long)xt_freq - xt_freq_nom) / xt_freq_nom);
+
+ retval = xt_frequency_set(to_i2c_client(dev->parent), xt_freq);
+ if (retval)
+ return retval;
+ return count;
+}
+
+static DEVICE_ATTR_WO(xt_frequency);
+
+static ssize_t xt_calibration_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int retval;
+ union abx8xx_reg_cal_xt reg_cal_xt;
+ union abx8xx_reg_oss reg_oss;
+ struct i2c_client *client = to_i2c_client(dev->parent);
+
+ retval = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSS);
+ if (retval < 0)
+ goto err;
+ reg_oss.val = retval;
+
+ retval = i2c_smbus_read_byte_data(client, ABX8XX_REG_CAL_XT);
+ if (retval < 0)
+ goto err;
+ reg_cal_xt.val = retval;
+
+ return sprintf(buf, "XTCAL %x\nCMDX %x\nOFFSETX %i = 0x%lx\n",
+ reg_oss.xtcal, reg_cal_xt.cmdx, reg_cal_xt.offsetx,
+ reg_cal_xt.offsetx & ABX8XX_CAL_XT_OFFSETX_MASK);
+err:
+ dev_err(dev, "Failed to read calibration data\n");
+ sprintf(buf, "\n");
+ return retval;
+}
+static DEVICE_ATTR_RO(xt_calibration);
+
#define SQFS_COUNT (1 << ABX8XX_SQW_MODE_BITS)
/* The index of the array is the value to be written to the 'Square Wave Function
* Select' register to make the RTC generate the required square wave.
@@ -611,6 +747,8 @@ static struct attribute *rtc_calib_attrs[] = {
&dev_attr_autocalibration.attr,
&dev_attr_oscillator.attr,
&dev_attr_sqw.attr,
+ &dev_attr_xt_calibration.attr,
+ &dev_attr_xt_frequency.attr,
NULL,
};

@@ -809,6 +947,7 @@ static int abx80x_probe(struct i2c_client *client,
unsigned int wafer;
unsigned int uid;
const char *sqw_mode_name;
+ unsigned int xt_freq;

if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
return -ENODEV;
@@ -923,6 +1062,12 @@ static int abx80x_probe(struct i2c_client *client,
abx80x_enable_trickle_charger(client, trickle_cfg);
}

+ if (!of_property_read_u32(np, "xt-frequency", &xt_freq)) {
+ dev_info(&client->dev, "Calibrate XT %d mHz:\n",
+ xt_freq);
+ xt_frequency_set(client, xt_freq);
+ }
+
if (!of_property_read_string(np, "sqw", &sqw_mode_name))
sqw_set(client, sqw_mode_name);

--
2.11.0
\
 
 \ /
  Last update: 2021-03-28 23:31    [W:0.085 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site