lkml.org 
[lkml]   [2021]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/8] mm: cma: introduce cma_release_nowait()
From
Date
On 3/25/21 4:49 PM, Mike Kravetz wrote:
> On 3/25/21 4:19 PM, Roman Gushchin wrote:
>> On Thu, Mar 25, 2021 at 01:12:51PM -0700, Minchan Kim wrote:
>>> On Thu, Mar 25, 2021 at 06:15:11PM +0100, David Hildenbrand wrote:
>>>> On 25.03.21 17:56, Mike Kravetz wrote:
>>>>> On 3/25/21 3:22 AM, Michal Hocko wrote:
>>>>>> On Thu 25-03-21 10:56:38, David Hildenbrand wrote:
>>>>>>> On 25.03.21 01:28, Mike Kravetz wrote:
>>>>>>>> From: Roman Gushchin <guro@fb.com>
>>>>>>>>
>>>>>>>> cma_release() has to lock the cma_lock mutex to clear the cma bitmap.
>>>>>>>> It makes it a blocking function, which complicates its usage from
>>>>>>>> non-blocking contexts. For instance, hugetlbfs code is temporarily
>>>>>>>> dropping the hugetlb_lock spinlock to call cma_release().
>>>>>>>>
>>>>>>>> This patch introduces a non-blocking cma_release_nowait(), which
>>>>>>>> postpones the cma bitmap clearance. It's done later from a work
>>>>>>>> context. The first page in the cma allocation is used to store
>>>>>>>> the work struct. Because CMA allocations and de-allocations are
>>>>>>>> usually not that frequent, a single global workqueue is used.
>>>>>>>>
>>>>>>>> To make sure that subsequent cma_alloc() call will pass, cma_alloc()
>>>>>>>> flushes the cma_release_wq workqueue. To avoid a performance
>>>>>>>> regression in the case when only cma_release() is used, gate it
>>>>>>>> by a per-cma area flag, which is set by the first call
>>>>>>>> of cma_release_nowait().
>>>>>>>>
>>>>>>>> Signed-off-by: Roman Gushchin <guro@fb.com>
>>>>>>>> [mike.kravetz@oracle.com: rebased to v5.12-rc3-mmotm-2021-03-17-22-24]
>>>>>>>> Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
>>>>>>>> ---
>>>>>>>
>>>>>>>
>>>>>>> 1. Is there a real reason this is a mutex and not a spin lock? It seems to
>>>>>>> only protect the bitmap. Are bitmaps that huge that we spend a significant
>>>>>>> amount of time in there?
>>>>>>
>>>>>> Good question. Looking at the code it doesn't seem that there is any
>>>>>> blockable operation or any heavy lifting done under the lock.
>>>>>> 7ee793a62fa8 ("cma: Remove potential deadlock situation") has introduced
>>>>>> the lock and there was a simple bitmat protection back then. I suspect
>>>>>> the patch just followed the cma_mutex lead and used the same type of the
>>>>>> lock. cma_mutex used to protect alloc_contig_range which is sleepable.
>>>>>>
>>>>>> This all suggests that there is no real reason to use a sleepable lock
>>>>>> at all and we do not need all this heavy lifting.
>>>>>>
>>>>>
>>>>> When Roman first proposed these patches, I brought up the same issue:
>>>>>
>>>>> https://lore.kernel.org/linux-mm/20201022023352.GC300658@carbon.dhcp.thefacebook.com/
>>>>>
>>>>> Previously, Roman proposed replacing the mutex with a spinlock but
>>>>> Joonsoo was opposed.
>>>>>
>>>>> Adding Joonsoo on Cc:
>>>>>
>>>>
>>>> There has to be a good reason not to. And if there is a good reason,
>>>> lockless clearing might be one feasible alternative.
>>>
>>> I also don't think nowait variant is good idea. If the scanning of
>>> bitmap is *really* significant, it might be signal that we need to
>>> introduce different technique or data structure not bitmap rather
>>> than a new API variant.
>>
>> I'd also prefer to just replace the mutex with a spinlock rather than fiddling
>> with a delayed release.
>>
>
> I hope Joonsoo or someone else brings up specific concerns. I do not
> know enough about all CMA use cases. Certainly, in this specific use
> case converting to a spinlock would not be an issue. Do note that we
> would want to convert to an irq safe spinlock and disable irqs if that
> makes any difference in the discussion.
>

Suggestions on how to move forward would be appreciated. I can think of
the following options.

- Use the the cma_release_nowait() routine as defined in this patch.

- Just change the mutex to an irq safe spinlock. AFAICT, the potential
downsides could be:
- Interrupts disabled during long bitmap scans
- Wasted cpu cycles (spinning) if there is much contention on lock
Both of these would be more of an issue on small/embedded systems. I
took a quick look at the callers of cma_alloc/cma_release and nothing
stood out that could lead to high degrees of contention. However, I
could have missed something.

- Another idea I had was to allow the user to specify the locking type
when creating a cma area. In this way, cma areas which may have
release calls from atomic context would be set up with an irq safe
spinlock. Others, would use the mutex. I admit this is a hackish
way to address the issue, but perhaps not much worse than the separate
cma_release_nowait interface?

- Change the CMA bitmap to some other data structure and algorithm.
This would obviously take more work.

Thanks,
--
Mike Kravetz

\
 
 \ /
  Last update: 2021-03-26 22:35    [W:0.192 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site