lkml.org 
[lkml]   [2021]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 3/3] pinctrl: Add Xilinx ZynqMP pinctrl driver support
On Mon, Mar 22, 2021 at 4:25 PM Sai Krishna Potthuri
<lakshmis@xilinx.com> wrote:
> [Andy]

> > > > > + PIN_CONFIG_IOSTANDARD = PIN_CONFIG_END + 1, };
> > > >
> > > > I'm lost here. What is IO standard exactly? Why it can't be in
> > > > generic headers?
> > > It represents LVCMOS 3.3 volts/ LVCMOS 1.8 volts.
> > > Since this is specific to Xilinx ZynqMP platform, considered to be
> > > added in the driver file.
> >
> > So, why can't we create a couple of bits to represent this voltages in the
> > generic header and gain usability for others as well?
>
> I see some drivers are maintaining the configuration list in the driver file, if
> the configuration is specific to the driver.
>
> We can move this to generic header if it is used by others as well.
> Ok, will wait for Linus to comment.
> >
> > Linus?

While it is fine to add custom pin config options to pin controllers
for hopelessly idiomatic stuff, this does look like it should be
using PIN_CONFIG_POWER_SOURCE with the voltage rail
as parameter, see
include/linux/pinctrl/pinconf-generic.h

If you're not using that then tell us why.

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2021-03-25 09:58    [W:0.087 / U:0.748 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site