lkml.org 
[lkml]   [2021]   [Mar]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1] drm/tegra: dc: Don't set PLL clock to 0Hz
On Tue, Mar 02, 2021 at 04:15:06PM +0300, Dmitry Osipenko wrote:
> RGB output doesn't allow to change parent clock rate of the display and
> PCLK rate is set to 0Hz in this case. The tegra_dc_commit_state() shall
> not set the display clock to 0Hz since this change propagates to the
> parent clock. The DISP clock is defined as a NODIV clock by the tegra-clk
> driver and all NODIV clocks use the CLK_SET_RATE_PARENT flag.
>
> This bug stayed unnoticed because by default PLLP is used as the parent
> clock for the display controller and PLLP silently skips the erroneous 0Hz
> rate changes because it always has active child clocks that don't permit
> rate changes. The PLLP isn't acceptable for some devices that we want to
> upstream (like Samsung Galaxy Tab and ASUS TF700T) due to a display panel
> clock rate requirements that can't be fulfilled by using PLLP and then the
> bug pops up in this case since parent clock is set to 0Hz, killing the
> display output.
>
> Don't touch DC clock if pclk=0 in order to fix the problem.
>
> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> ---
> drivers/gpu/drm/tegra/dc.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)

Applied, thanks.

Thierry
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2021-03-24 16:15    [W:0.058 / U:1.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site