lkml.org 
[lkml]   [2021]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] watchdog: Remove MV64x60 watchdog driver
From
Date
On 3/18/21 10:25 AM, Christophe Leroy wrote:
> Commit 92c8c16f3457 ("powerpc/embedded6xx: Remove C2K board support")
> removed the last selector of CONFIG_MV64X60.
>
> Therefore CONFIG_MV64X60_WDT cannot be selected anymore and
> can be removed.
>
> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
> drivers/watchdog/Kconfig | 4 -
> drivers/watchdog/Makefile | 1 -
> drivers/watchdog/mv64x60_wdt.c | 324 ---------------------------------
> include/linux/mv643xx.h | 8 -
> 4 files changed, 337 deletions(-)
> delete mode 100644 drivers/watchdog/mv64x60_wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 1fe0042a48d2..178296bda151 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1831,10 +1831,6 @@ config 8xxx_WDT
>
> For BookE processors (MPC85xx) use the BOOKE_WDT driver instead.
>
> -config MV64X60_WDT
> - tristate "MV64X60 (Marvell Discovery) Watchdog Timer"
> - depends on MV64X60 || COMPILE_TEST
> -
> config PIKA_WDT
> tristate "PIKA FPGA Watchdog"
> depends on WARP || (PPC64 && COMPILE_TEST)
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index f3a6540e725e..752c6513f731 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -175,7 +175,6 @@ obj-$(CONFIG_PIC32_DMT) += pic32-dmt.o
> # POWERPC Architecture
> obj-$(CONFIG_GEF_WDT) += gef_wdt.o
> obj-$(CONFIG_8xxx_WDT) += mpc8xxx_wdt.o
> -obj-$(CONFIG_MV64X60_WDT) += mv64x60_wdt.o
> obj-$(CONFIG_PIKA_WDT) += pika_wdt.o
> obj-$(CONFIG_BOOKE_WDT) += booke_wdt.o
> obj-$(CONFIG_MEN_A21_WDT) += mena21_wdt.o
> diff --git a/drivers/watchdog/mv64x60_wdt.c b/drivers/watchdog/mv64x60_wdt.c
> deleted file mode 100644
> index 894aa63488d3..000000000000
> --- a/drivers/watchdog/mv64x60_wdt.c
> +++ /dev/null
> @@ -1,324 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/*
> - * mv64x60_wdt.c - MV64X60 (Marvell Discovery) watchdog userspace interface
> - *
> - * Author: James Chapman <jchapman@katalix.com>
> - *
> - * Platform-specific setup code should configure the dog to generate
> - * interrupt or reset as required. This code only enables/disables
> - * and services the watchdog.
> - *
> - * Derived from mpc8xx_wdt.c, with the following copyright.
> - *
> - * 2002 (c) Florian Schirmer <jolt@tuxbox.org>
> - */
> -
> -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> -
> -#include <linux/fs.h>
> -#include <linux/init.h>
> -#include <linux/kernel.h>
> -#include <linux/miscdevice.h>
> -#include <linux/module.h>
> -#include <linux/watchdog.h>
> -#include <linux/platform_device.h>
> -#include <linux/mv643xx.h>
> -#include <linux/uaccess.h>
> -#include <linux/io.h>
> -
> -#define MV64x60_WDT_WDC_OFFSET 0
> -
> -/*
> - * The watchdog configuration register contains a pair of 2-bit fields,
> - * 1. a reload field, bits 27-26, which triggers a reload of
> - * the countdown register, and
> - * 2. an enable field, bits 25-24, which toggles between
> - * enabling and disabling the watchdog timer.
> - * Bit 31 is a read-only field which indicates whether the
> - * watchdog timer is currently enabled.
> - *
> - * The low 24 bits contain the timer reload value.
> - */
> -#define MV64x60_WDC_ENABLE_SHIFT 24
> -#define MV64x60_WDC_SERVICE_SHIFT 26
> -#define MV64x60_WDC_ENABLED_SHIFT 31
> -
> -#define MV64x60_WDC_ENABLED_TRUE 1
> -#define MV64x60_WDC_ENABLED_FALSE 0
> -
> -/* Flags bits */
> -#define MV64x60_WDOG_FLAG_OPENED 0
> -
> -static unsigned long wdt_flags;
> -static int wdt_status;
> -static void __iomem *mv64x60_wdt_regs;
> -static int mv64x60_wdt_timeout;
> -static int mv64x60_wdt_count;
> -static unsigned int bus_clk;
> -static char expect_close;
> -static DEFINE_SPINLOCK(mv64x60_wdt_spinlock);
> -
> -static bool nowayout = WATCHDOG_NOWAYOUT;
> -module_param(nowayout, bool, 0);
> -MODULE_PARM_DESC(nowayout,
> - "Watchdog cannot be stopped once started (default="
> - __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> -
> -static int mv64x60_wdt_toggle_wdc(int enabled_predicate, int field_shift)
> -{
> - u32 data;
> - u32 enabled;
> - int ret = 0;
> -
> - spin_lock(&mv64x60_wdt_spinlock);
> - data = readl(mv64x60_wdt_regs + MV64x60_WDT_WDC_OFFSET);
> - enabled = (data >> MV64x60_WDC_ENABLED_SHIFT) & 1;
> -
> - /* only toggle the requested field if enabled state matches predicate */
> - if ((enabled ^ enabled_predicate) == 0) {
> - /* We write a 1, then a 2 -- to the appropriate field */
> - data = (1 << field_shift) | mv64x60_wdt_count;
> - writel(data, mv64x60_wdt_regs + MV64x60_WDT_WDC_OFFSET);
> -
> - data = (2 << field_shift) | mv64x60_wdt_count;
> - writel(data, mv64x60_wdt_regs + MV64x60_WDT_WDC_OFFSET);
> - ret = 1;
> - }
> - spin_unlock(&mv64x60_wdt_spinlock);
> -
> - return ret;
> -}
> -
> -static void mv64x60_wdt_service(void)
> -{
> - mv64x60_wdt_toggle_wdc(MV64x60_WDC_ENABLED_TRUE,
> - MV64x60_WDC_SERVICE_SHIFT);
> -}
> -
> -static void mv64x60_wdt_handler_enable(void)
> -{
> - if (mv64x60_wdt_toggle_wdc(MV64x60_WDC_ENABLED_FALSE,
> - MV64x60_WDC_ENABLE_SHIFT)) {
> - mv64x60_wdt_service();
> - pr_notice("watchdog activated\n");
> - }
> -}
> -
> -static void mv64x60_wdt_handler_disable(void)
> -{
> - if (mv64x60_wdt_toggle_wdc(MV64x60_WDC_ENABLED_TRUE,
> - MV64x60_WDC_ENABLE_SHIFT))
> - pr_notice("watchdog deactivated\n");
> -}
> -
> -static void mv64x60_wdt_set_timeout(unsigned int timeout)
> -{
> - /* maximum bus cycle count is 0xFFFFFFFF */
> - if (timeout > 0xFFFFFFFF / bus_clk)
> - timeout = 0xFFFFFFFF / bus_clk;
> -
> - mv64x60_wdt_count = timeout * bus_clk >> 8;
> - mv64x60_wdt_timeout = timeout;
> -}
> -
> -static int mv64x60_wdt_open(struct inode *inode, struct file *file)
> -{
> - if (test_and_set_bit(MV64x60_WDOG_FLAG_OPENED, &wdt_flags))
> - return -EBUSY;
> -
> - if (nowayout)
> - __module_get(THIS_MODULE);
> -
> - mv64x60_wdt_handler_enable();
> -
> - return stream_open(inode, file);
> -}
> -
> -static int mv64x60_wdt_release(struct inode *inode, struct file *file)
> -{
> - if (expect_close == 42)
> - mv64x60_wdt_handler_disable();
> - else {
> - pr_crit("unexpected close, not stopping timer!\n");
> - mv64x60_wdt_service();
> - }
> - expect_close = 0;
> -
> - clear_bit(MV64x60_WDOG_FLAG_OPENED, &wdt_flags);
> -
> - return 0;
> -}
> -
> -static ssize_t mv64x60_wdt_write(struct file *file, const char __user *data,
> - size_t len, loff_t *ppos)
> -{
> - if (len) {
> - if (!nowayout) {
> - size_t i;
> -
> - expect_close = 0;
> -
> - for (i = 0; i != len; i++) {
> - char c;
> - if (get_user(c, data + i))
> - return -EFAULT;
> - if (c == 'V')
> - expect_close = 42;
> - }
> - }
> - mv64x60_wdt_service();
> - }
> -
> - return len;
> -}
> -
> -static long mv64x60_wdt_ioctl(struct file *file,
> - unsigned int cmd, unsigned long arg)
> -{
> - int timeout;
> - int options;
> - void __user *argp = (void __user *)arg;
> - static const struct watchdog_info info = {
> - .options = WDIOF_SETTIMEOUT |
> - WDIOF_MAGICCLOSE |
> - WDIOF_KEEPALIVEPING,
> - .firmware_version = 0,
> - .identity = "MV64x60 watchdog",
> - };
> -
> - switch (cmd) {
> - case WDIOC_GETSUPPORT:
> - if (copy_to_user(argp, &info, sizeof(info)))
> - return -EFAULT;
> - break;
> -
> - case WDIOC_GETSTATUS:
> - case WDIOC_GETBOOTSTATUS:
> - if (put_user(wdt_status, (int __user *)argp))
> - return -EFAULT;
> - wdt_status &= ~WDIOF_KEEPALIVEPING;
> - break;
> -
> - case WDIOC_GETTEMP:
> - return -EOPNOTSUPP;
> -
> - case WDIOC_SETOPTIONS:
> - if (get_user(options, (int __user *)argp))
> - return -EFAULT;
> -
> - if (options & WDIOS_DISABLECARD)
> - mv64x60_wdt_handler_disable();
> -
> - if (options & WDIOS_ENABLECARD)
> - mv64x60_wdt_handler_enable();
> - break;
> -
> - case WDIOC_KEEPALIVE:
> - mv64x60_wdt_service();
> - wdt_status |= WDIOF_KEEPALIVEPING;
> - break;
> -
> - case WDIOC_SETTIMEOUT:
> - if (get_user(timeout, (int __user *)argp))
> - return -EFAULT;
> - mv64x60_wdt_set_timeout(timeout);
> - fallthrough;
> -
> - case WDIOC_GETTIMEOUT:
> - if (put_user(mv64x60_wdt_timeout, (int __user *)argp))
> - return -EFAULT;
> - break;
> -
> - default:
> - return -ENOTTY;
> - }
> -
> - return 0;
> -}
> -
> -static const struct file_operations mv64x60_wdt_fops = {
> - .owner = THIS_MODULE,
> - .llseek = no_llseek,
> - .write = mv64x60_wdt_write,
> - .unlocked_ioctl = mv64x60_wdt_ioctl,
> - .compat_ioctl = compat_ptr_ioctl,
> - .open = mv64x60_wdt_open,
> - .release = mv64x60_wdt_release,
> -};
> -
> -static struct miscdevice mv64x60_wdt_miscdev = {
> - .minor = WATCHDOG_MINOR,
> - .name = "watchdog",
> - .fops = &mv64x60_wdt_fops,
> -};
> -
> -static int mv64x60_wdt_probe(struct platform_device *dev)
> -{
> - struct mv64x60_wdt_pdata *pdata = dev_get_platdata(&dev->dev);
> - struct resource *r;
> - int timeout = 10;
> -
> - bus_clk = 133; /* in MHz */
> - if (pdata) {
> - timeout = pdata->timeout;
> - bus_clk = pdata->bus_clk;
> - }
> -
> - /* Since bus_clk is truncated MHz, actual frequency could be
> - * up to 1MHz higher. Round up, since it's better to time out
> - * too late than too soon.
> - */
> - bus_clk++;
> - bus_clk *= 1000000; /* convert to Hz */
> -
> - r = platform_get_resource(dev, IORESOURCE_MEM, 0);
> - if (!r)
> - return -ENODEV;
> -
> - mv64x60_wdt_regs = devm_ioremap(&dev->dev, r->start, resource_size(r));
> - if (mv64x60_wdt_regs == NULL)
> - return -ENOMEM;
> -
> - mv64x60_wdt_set_timeout(timeout);
> -
> - mv64x60_wdt_handler_disable(); /* in case timer was already running */
> -
> - return misc_register(&mv64x60_wdt_miscdev);
> -}
> -
> -static int mv64x60_wdt_remove(struct platform_device *dev)
> -{
> - misc_deregister(&mv64x60_wdt_miscdev);
> -
> - mv64x60_wdt_handler_disable();
> -
> - return 0;
> -}
> -
> -static struct platform_driver mv64x60_wdt_driver = {
> - .probe = mv64x60_wdt_probe,
> - .remove = mv64x60_wdt_remove,
> - .driver = {
> - .name = MV64x60_WDT_NAME,
> - },
> -};
> -
> -static int __init mv64x60_wdt_init(void)
> -{
> - pr_info("MV64x60 watchdog driver\n");
> -
> - return platform_driver_register(&mv64x60_wdt_driver);
> -}
> -
> -static void __exit mv64x60_wdt_exit(void)
> -{
> - platform_driver_unregister(&mv64x60_wdt_driver);
> -}
> -
> -module_init(mv64x60_wdt_init);
> -module_exit(mv64x60_wdt_exit);
> -
> -MODULE_AUTHOR("James Chapman <jchapman@katalix.com>");
> -MODULE_DESCRIPTION("MV64x60 watchdog driver");
> -MODULE_LICENSE("GPL");
> -MODULE_ALIAS("platform:" MV64x60_WDT_NAME);
> diff --git a/include/linux/mv643xx.h b/include/linux/mv643xx.h
> index 47e5679b48e1..000b126acfb6 100644
> --- a/include/linux/mv643xx.h
> +++ b/include/linux/mv643xx.h
> @@ -918,12 +918,4 @@
>
> extern void mv64340_irq_init(unsigned int base);
>
> -/* Watchdog Platform Device, Driver Data */
> -#define MV64x60_WDT_NAME "mv64x60_wdt"
> -
> -struct mv64x60_wdt_pdata {
> - int timeout; /* watchdog expiry in seconds, default 10 */
> - int bus_clk; /* bus clock in MHz, default 133 */
> -};
> -
> #endif /* __ASM_MV643XX_H */
>

\
 
 \ /
  Last update: 2021-03-18 19:34    [W:0.123 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site