lkml.org 
[lkml]   [2021]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.11 012/306] ath11k: fix AP mode for QCA6390
Date
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

From: Kalle Valo <kvalo@codeaurora.org>

commit 77d7e87128d4dfb400df4208b2812160e999c165 upstream.

Commit c134d1f8c436 ("ath11k: Handle errors if peer creation fails") completely
broke AP mode on QCA6390:

kernel: [ 151.230734] ath11k_pci 0000:06:00.0: failed to create peer after vdev start delay: -22
wpa_supplicant[2307]: Failed to set beacon parameters
wpa_supplicant[2307]: Interface initialization failed
wpa_supplicant[2307]: wlan0: interface state UNINITIALIZED->DISABLED
wpa_supplicant[2307]: wlan0: AP-DISABLED
wpa_supplicant[2307]: wlan0: Unable to setup interface.
wpa_supplicant[2307]: Failed to initialize AP interface

This was because commit c134d1f8c436 ("ath11k: Handle errors if peer creation
fails") added error handling for ath11k_peer_create(), which had been failing
all along but was unnoticed due to the missing error handling. The actual bug
was introduced already in commit aa44b2f3ecd4 ("ath11k: start vdev if a bss peer is
already created").

ath11k_peer_create() was failing because for AP mode the peer is created
already earlier op_add_interface() and we should skip creation here, but the
check for modes was wrong. Fixing that makes AP mode work again.

This shouldn't affect IPQ8074 nor QCN9074 as they have hw_params.vdev_start_delay disabled.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Fixes: c134d1f8c436 ("ath11k: Handle errors if peer creation fails")
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1614006849-25764-1-git-send-email-kvalo@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/wireless/ath/ath11k/mac.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -5299,8 +5299,8 @@ ath11k_mac_op_assign_vif_chanctx(struct
}

if (ab->hw_params.vdev_start_delay &&
- (arvif->vdev_type == WMI_VDEV_TYPE_AP ||
- arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)) {
+ arvif->vdev_type != WMI_VDEV_TYPE_AP &&
+ arvif->vdev_type != WMI_VDEV_TYPE_MONITOR) {
param.vdev_id = arvif->vdev_id;
param.peer_type = WMI_PEER_TYPE_DEFAULT;
param.peer_addr = ar->mac_addr;

\
 
 \ /
  Last update: 2021-03-15 15:05    [W:0.980 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site