lkml.org 
[lkml]   [2021]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/3] dt-bindings:iio:adc: add generic settling-time-us and average-samples channel properties
On Fri, 12 Mar 2021 11:55:13 +0100
Oleksij Rempel <o.rempel@pengutronix.de> wrote:

> Settling time and over sampling is a typical challenge for different IIO ADC
> devices. So, introduce channel specific settling-time-us and average-samples
> properties to cover this use case.
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> Documentation/devicetree/bindings/iio/adc/adc.yaml | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/adc.yaml b/Documentation/devicetree/bindings/iio/adc/adc.yaml
> index 912a7635edc4..c748f6573027 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adc.yaml
> @@ -39,4 +39,13 @@ properties:
> The first value specifies the positive input pin, the second
> specifies the negative input pin.
>
> + settling-time-us:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Time between enabling the channel and firs stable readings.

first

> +
> + average-samples:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: Number of data samples which are averaged for each read.

So in IIO at least, we tend to refer to this as oversampling. Perhaps we
should use that term here as well? It would also be good to give some hint
as to why this might be a DT property rather than a userspace control.

Thanks,

Jonathan

> +
> additionalProperties: true

\
 
 \ /
  Last update: 2021-03-13 16:16    [W:0.871 / U:0.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site