lkml.org 
[lkml]   [2021]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 1/1] mmc: sdhci-acpi: Add support for NVIDIA BlueField-3 SoC
Date
This commit adds ACPI support for the BlueField-3 SoC which uses
the DWC_mshc eMMC controller. The boundary check logic in static
function dwcmshc_adma_write_desc() comes from sdhci-of-dwcmshc.c.

Signed-off-by: Liming Sun <limings@nvidia.com>
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
---
drivers/mmc/host/sdhci-acpi.c | 64 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)

diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index 54205e3..6448e94e 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -716,6 +716,68 @@ static int sdhci_acpi_emmc_amd_probe_slot(struct platform_device *pdev,
.priv_size = sizeof(struct amd_sdhci_host),
};

+/* Check DMA address/length boundary. */
+static inline bool dwcmshc_adma_boundary_ok(dma_addr_t addr, int len)
+{
+ return (addr | (SZ_128M - 1)) == ((addr + len - 1) | (SZ_128M - 1));
+}
+
+/*
+ * If DMA addr spans 128MB boundary, we split the DMA transfer into two
+ * so that each DMA transfer doesn't exceed the boundary.
+ */
+static void dwcmshc_adma_write_desc(struct sdhci_host *host, void **desc,
+ dma_addr_t addr, int len, unsigned int cmd)
+{
+ int tmplen, offset;
+
+ if (likely(!len || dwcmshc_adma_boundary_ok(addr, len))) {
+ sdhci_adma_write_desc(host, desc, addr, len, cmd);
+ return;
+ }
+
+ offset = addr & (SZ_128M - 1);
+ tmplen = SZ_128M - offset;
+ sdhci_adma_write_desc(host, desc, addr, tmplen, cmd);
+
+ addr += tmplen;
+ len -= tmplen;
+ sdhci_adma_write_desc(host, desc, addr, len, cmd);
+}
+
+static int sdhci_acpi_emmc_nvda_bf_probe_slot(struct platform_device *pdev,
+ struct acpi_device *adev)
+{
+ struct sdhci_acpi_host *c = platform_get_drvdata(pdev);
+ struct sdhci_host *host = c->host;
+ u32 extra;
+
+ /* Extra adma table cnt for cross 128M boundary handling. */
+ extra = DIV_ROUND_UP_ULL(dma_get_required_mask(&pdev->dev), SZ_128M);
+ extra = min(extra, (u32)SDHCI_MAX_SEGS);
+ host->adma_table_cnt += extra;
+
+ return 0;
+}
+
+static const struct sdhci_ops sdhci_acpi_ops_nvda_bf = {
+ .set_clock = sdhci_set_clock,
+ .set_bus_width = sdhci_set_bus_width,
+ .set_uhs_signaling = sdhci_set_uhs_signaling,
+ .reset = sdhci_reset,
+ .adma_write_desc = dwcmshc_adma_write_desc,
+};
+
+static const struct sdhci_acpi_chip sdhci_acpi_chip_nvda_bf = {
+ .ops = &sdhci_acpi_ops_nvda_bf,
+};
+
+static const struct sdhci_acpi_slot sdhci_acpi_slot_nvda_bf_emmc = {
+ .chip = &sdhci_acpi_chip_nvda_bf,
+ .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
+ .probe_slot = sdhci_acpi_emmc_nvda_bf_probe_slot,
+};
+
struct sdhci_acpi_uid_slot {
const char *hid;
const char *uid;
@@ -740,6 +802,7 @@ struct sdhci_acpi_uid_slot {
{ "QCOM8051", NULL, &sdhci_acpi_slot_qcom_sd_3v },
{ "QCOM8052", NULL, &sdhci_acpi_slot_qcom_sd },
{ "AMDI0040", NULL, &sdhci_acpi_slot_amd_emmc },
+ { "MLNXBF30", NULL, &sdhci_acpi_slot_nvda_bf_emmc },
{ },
};

@@ -757,6 +820,7 @@ struct sdhci_acpi_uid_slot {
{ "QCOM8051" },
{ "QCOM8052" },
{ "AMDI0040" },
+ { "MLNXBF30" },
{ },
};
MODULE_DEVICE_TABLE(acpi, sdhci_acpi_ids);
--
1.8.3.1
\
 
 \ /
  Last update: 2021-03-12 14:50    [W:0.986 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site