lkml.org 
[lkml]   [2021]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 0/9] soundwire: qcom: various improvements
From
Date


On 3/12/21 6:00 AM, Srinivas Kandagatla wrote:
> Thanks for reviewing v3 of this patchset!
>
> During testing SoundWire controller on SM8250 MTP, we found
> few issues like all the interrupts are not handled,
> all transport parameters are not read from device tree.
> Patch to add Auto Enumeration supported by the controller
> is also part of this series.
>
> Other major issue was register read/writes which was interrupt based
> was an overhead and puts lot of limitation on context it can be used from.
>
> With previous approach number of interrupts generated
> after enumeration are around 130:
> $ cat /proc/interrupts | grep soundwire
> 21: 130 0 0 0 0 0 0 0 GICv3 234 Edge soundwire
>
> after this patch they are just 3 interrupts
> $ cat /proc/interrupts | grep soundwire
> 21: 3 0 0 0 0 0 0 0 GICv3 234 Edge soundwire
>
> So this patchset add various improvements to the existing driver
> to address above issues.
>
> Tested it on SM8250 MTP with 2x WSA881x speakers, HeadPhones on
> WCD938x via lpass-rx-macro and Analog MICs via lpass-tx-macro.
> Also tested on DragonBoard DB845c with 2xWSA881x speakers.

LGTM, for the series

Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

>
> Changes since v3:
> - Fixed setting assigned bit during autoenumeration
>
> Srinivas Kandagatla (9):
> dt-bindings: soundwire: qcom: clarify data port bus parameters
> soundwire: qcom: add support to missing transport params
> soundwire: qcom: set continue execution flag for ignored commands
> soundwire: qcom: start the clock during initialization
> soundwire: qcom: update register read/write routine
> soundwire: qcom: add support to new interrupts
> soundwire: export sdw_compare_devid() and sdw_extract_slave_id()
> soundwire: qcom: add auto enumeration support
> soundwire: qcom: wait for enumeration to be complete in probe
>
> .../bindings/soundwire/qcom,sdw.txt | 20 +
> drivers/soundwire/bus.c | 4 +-
> drivers/soundwire/qcom.c | 529 ++++++++++++++----
> include/linux/soundwire/sdw.h | 2 +
> 4 files changed, 442 insertions(+), 113 deletions(-)
>

\
 
 \ /
  Last update: 2021-03-12 17:57    [W:1.808 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site