lkml.org 
[lkml]   [2021]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    Date
    From
    Subject[RFC PATCH v3 5/7] dt-bindings: regulator: bd9576 add FET ON-resistance for OCW
    BD9576MUF provides over-current protection and detection. Current is
    measured as voltage loss over external FET. Allow specifying FET's on
    resistance so current monitoring limits can be converted to voltages.

    Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
    ---
    v3:
    - no changes
    v2:
    - use standard micro-ohms suffix

    .../devicetree/bindings/regulator/rohm,bd9576-regulator.yaml | 5 +++++
    1 file changed, 5 insertions(+)

    diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
    index b6515a0cee62..9c119c1b1904 100644
    --- a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
    +++ b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
    @@ -27,6 +27,11 @@ patternProperties:
    Properties for single regulator.
    $ref: "regulator.yaml#"

    + properties:
    + rohm,ocw-fet-ron-micro-ohms:
    + description: External FET's ON-resistance. Required if VoutS1 OCP/OCW is
    + to be set.
    +
    required:
    - regulator-name

    --
    2.25.4

    --
    Matti Vaittinen, Linux device drivers
    ROHM Semiconductors, Finland SWDC
    Kiviharjunlenkki 1E
    90220 OULU
    FINLAND

    ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
    Simon says - in Latin please.
    ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
    Thanks to Simon Glass for the translation =]

    \
     
     \ /
      Last update: 2021-03-11 11:25    [W:2.632 / U:0.692 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site