lkml.org 
[lkml]   [2021]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/5] soundwire: qcom: update port map allocation bit mask
From
Date


On 3/9/21 8:15 AM, Srinivas Kandagatla wrote:
> currently the internal bitmask used for allocating ports starts with offset 0.
> This is bit confusing as data port numbers on Qualcomm controller are valid
> from 1 to 14. So adjust this bit mask accordingly, this will also help while
> adding static port map support.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
> drivers/soundwire/qcom.c | 11 +++++++----
> 1 file changed, 7 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
> index 6d22df01f354..f4f1c5f2af0b 100644
> --- a/drivers/soundwire/qcom.c
> +++ b/drivers/soundwire/qcom.c
> @@ -519,7 +519,7 @@ static void qcom_swrm_stream_free_ports(struct qcom_swrm_ctrl *ctrl,
> port_mask = &ctrl->din_port_mask;
>
> list_for_each_entry(p_rt, &m_rt->port_list, port_node)
> - clear_bit(p_rt->num - 1, port_mask);
> + clear_bit(p_rt->num, port_mask);
> }
>
> mutex_unlock(&ctrl->port_lock);
> @@ -552,13 +552,13 @@ static int qcom_swrm_stream_alloc_ports(struct qcom_swrm_ctrl *ctrl,
> list_for_each_entry(p_rt, &s_rt->port_list, port_node) {
> /* Port numbers start from 1 - 14*/
> pn = find_first_zero_bit(port_mask, maxport);
> - if (pn > (maxport - 1)) {
> + if (pn > (maxport)) {

nit-pick: useless parentheses

> dev_err(ctrl->dev, "All ports busy\n");
> ret = -EBUSY;
> goto err;
> }
> set_bit(pn, port_mask);
> - pconfig[nports].num = pn + 1;
> + pconfig[nports].num = pn;
> pconfig[nports].ch_mask = p_rt->ch_mask;
> nports++;
> }
> @@ -580,7 +580,7 @@ static int qcom_swrm_stream_alloc_ports(struct qcom_swrm_ctrl *ctrl,
> err:
> if (ret) {
> for (i = 0; i < nports; i++)
> - clear_bit(pconfig[i].num - 1, port_mask);
> + clear_bit(pconfig[i].num, port_mask);
> }
>
> mutex_unlock(&ctrl->port_lock);
> @@ -754,6 +754,9 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl)
> ctrl->num_dout_ports = val;
>
> nports = ctrl->num_dout_ports + ctrl->num_din_ports;
> + /* port numbers are non zero, so mark port 0 */

mask?

> + set_bit(0, &ctrl->dout_port_mask);
> + set_bit(0, &ctrl->din_port_mask);
>
> ret = of_property_read_u8_array(np, "qcom,ports-offset1",
> off1, nports);
>

\
 
 \ /
  Last update: 2021-03-10 16:46    [W:0.095 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site