lkml.org 
[lkml]   [2021]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] usb: gadget: uvc: add bInterval checking for HS mode
Date
Please check whether the problem occurs in this fragment of code:
https://elixir.bootlin.com/linux/latest/source/drivers/usb/cdns3/gadget.c#L2569

zlp_buff is allocated with kzalloc.

Pawel

>>On Fri, Mar 5, 2021 at 12:40 AM Pawel Laszczak <mailto:pawell@cadence.com> wrote:
>>From: Pawel Laszczak <mailto:pawell@cadence.com>
>>
>>Patch adds extra checking for bInterval passed by configfs.
>>The 5.6.4 chapter of USB Specification (rev. 2.0) say:
>>"A high-bandwidth endpoint must specify a period of 1x125 µs
>>(i.e., a bInterval value of 1)."
>>
>>The issue was observed during testing UVC class on CV.
>>I treat this change as improvement because we can control
>>bInterval by configfs.
>>
>>Signed-off-by: Pawel Laszczak <mailto:pawell@cadence.com>
>>---
>> drivers/usb/gadget/function/f_uvc.c | 6 ++++++
>> 1 file changed, 6 insertions(+)
>>
>>diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c
>>index 44b4352a2676..5d62720bb9e1 100644
>>--- a/drivers/usb/gadget/function/f_uvc.c
>>+++ b/drivers/usb/gadget/function/f_uvc.c
>>@@ -631,6 +631,12 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
>>                cpu_to_le16(min(opts->streaming_maxpacket, 1023U));
>>        uvc_fs_streaming_ep.bInterval = opts->streaming_interval;
>>
>>+       /* A high-bandwidth endpoint must specify a bInterval value of 1 */
>>+       if (max_packet_mult > 1)
>>+               uvc_hs_streaming_ep.bInterval = 1;
>>+       else
>>+               uvc_hs_streaming_ep.bInterval = opts->streaming_interval;
>>+
>>
>>There is a "uvc_hs_streaming_ep.bInterval = opts->streaming_interval;" again at below code
>>Besides, the default value is 1 for opts->streaming_interval. What the real issue you observed
>>at CV test?
>>
>
>The issue occurs when I intentionally set:
> echo 3072 > functions/$FUNCTION/streaming_maxpacket
> echo 4 > functions/$FUNCTION/streaming_interval
>
>Then for CV CH9 TD 9.5: Endpoint Descriptor test it got:
>"(Mult = 2)Illegal high speed isochronous endpoint MaxPacketSize : 0x400
>(USB: 1.2.78) A High speed Interrupt/Isochronous endpoint must have a MaxPacketSize between
>683 and 1024 and bInterval value of 1 when the Mult value is two."
>
>For default value CV passed. Of course, I can fix it by changing streaming_interval, but I thought that
>it could be good to have protection against this issue.
>Especially since Usb 2 specification say that bInterval must be 1 for high bandwidth endpoints.
>
>Pawel
>
>>Peter
>>
>>        uvc_hs_streaming_ep.wMaxPacketSize =
>>                cpu_to_le16(max_packet_size | ((max_packet_mult - 1) << 11));
>>        uvc_hs_streaming_ep.bInterval = opts->streaming_interval;
>>--
>>2.25.1
\
 
 \ /
  Last update: 2021-03-10 06:47    [W:0.058 / U:0.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site