lkml.org 
[lkml]   [2021]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH v6 00/22] virtio/vsock: introduce SOCK_SEQPACKET support
Hi Arseny,
thanks for this new version.

It's a busy week for me, but I hope to review this series by the end of
this week :-)

Thanks,
Stefano

On Sun, Mar 07, 2021 at 08:57:19PM +0300, Arseny Krasnov wrote:
> This patchset implements support of SOCK_SEQPACKET for virtio
>transport.
> As SOCK_SEQPACKET guarantees to save record boundaries, so to
>do it, two new packet operations were added: first for start of record
> and second to mark end of record(SEQ_BEGIN and SEQ_END later). Also,
>both operations carries metadata - to maintain boundaries and payload
>integrity. Metadata is introduced by adding special header with two
>fields - message id and message length:
>
> struct virtio_vsock_seq_hdr {
> __le32 msg_id;
> __le32 msg_len;
> } __attribute__((packed));
>
> This header is transmitted as payload of SEQ_BEGIN and SEQ_END
>packets(buffer of second virtio descriptor in chain) in the same way as
>data transmitted in RW packets. Payload was chosen as buffer for this
>header to avoid touching first virtio buffer which carries header of
>packet, because someone could check that size of this buffer is equal
>to size of packet header. To send record, packet with start marker is
>sent first(it's header carries length of record and id),then all data
>is sent as usual 'RW' packets and finally SEQ_END is sent(it carries
>id of message, which is equal to id of SEQ_BEGIN), also after sending
>SEQ_END id is incremented. On receiver's side,size of record is known
>from packet with start record marker. To check that no packets were
>dropped by transport, 'msg_id's of two sequential SEQ_BEGIN and SEQ_END
>are checked to be equal and length of data between two markers is
>compared to then length in SEQ_BEGIN header.
> Now as packets of one socket are not reordered neither on
>vsock nor on vhost transport layers, such markers allows to restore
>original record on receiver's side. If user's buffer is smaller that
>record length, when all out of size data is dropped.
> Maximum length of datagram is not limited as in stream socket,
>because same credit logic is used. Difference with stream socket is
>that user is not woken up until whole record is received or error
>occurred. Implementation also supports 'MSG_EOR' and 'MSG_TRUNC' flags.
> Tests also implemented.
>
> Thanks to stsp2@yandex.ru for encouragements and initial design
>recommendations.
>
> Arseny Krasnov (22):
> af_vsock: update functions for connectible socket
> af_vsock: separate wait data loop
> af_vsock: separate receive data loop
> af_vsock: implement SEQPACKET receive loop
> af_vsock: separate wait space loop
> af_vsock: implement send logic for SEQPACKET
> af_vsock: rest of SEQPACKET support
> af_vsock: update comments for stream sockets
> virtio/vsock: set packet's type in virtio_transport_send_pkt_info()
> virtio/vsock: simplify credit update function API
> virtio/vsock: dequeue callback for SOCK_SEQPACKET
> virtio/vsock: fetch length for SEQPACKET record
> virtio/vsock: add SEQPACKET receive logic
> virtio/vsock: rest of SOCK_SEQPACKET support
> virtio/vsock: SEQPACKET feature bit
> vhost/vsock: SEQPACKET feature bit support
> virtio/vsock: SEQPACKET feature bit support
> virtio/vsock: setup SEQPACKET ops for transport
> vhost/vsock: setup SEQPACKET ops for transport
> vsock/loopback: setup SEQPACKET ops for transport
> vsock_test: add SOCK_SEQPACKET tests
> virtio/vsock: update trace event for SEQPACKET
>
> drivers/vhost/vsock.c | 22 +-
> include/linux/virtio_vsock.h | 22 +
> include/net/af_vsock.h | 10 +
> .../events/vsock_virtio_transport_common.h | 48 +-
> include/uapi/linux/virtio_vsock.h | 19 +
> net/vmw_vsock/af_vsock.c | 589 +++++++++++------
> net/vmw_vsock/virtio_transport.c | 18 +
> net/vmw_vsock/virtio_transport_common.c | 364 ++++++++--
> net/vmw_vsock/vsock_loopback.c | 13 +
> tools/testing/vsock/util.c | 32 +-
> tools/testing/vsock/util.h | 3 +
> tools/testing/vsock/vsock_test.c | 126 ++++
> 12 files changed, 1013 insertions(+), 253 deletions(-)
>
> v5 -> v6:
> General changelog:
> - virtio transport specific callbacks which send SEQ_BEGIN or
> SEQ_END now hidden inside virtio transport. Only enqueue,
> dequeue and record length callbacks are provided by transport.
>
> - virtio feature bit for SEQPACKET socket support introduced:
> VIRTIO_VSOCK_F_SEQPACKET.
>
> - 'msg_cnt' field in 'struct virtio_vsock_seq_hdr' renamed to
> 'msg_id' and used as id.
>
> Per patch changelog:
> - 'af_vsock: separate wait data loop':
> 1) Commit message updated.
> 2) 'prepare_to_wait()' moved inside while loop(thanks to
> Jorgen Hansen).
> Marked 'Reviewed-by' with 1), but as 2) I removed R-b.
>
> - 'af_vsock: separate receive data loop': commit message
> updated.
> Marked 'Reviewed-by' with that fix.
>
> - 'af_vsock: implement SEQPACKET receive loop': style fixes.
>
> - 'af_vsock: rest of SEQPACKET support':
> 1) 'module_put()' added when transport callback check failed.
> 2) Now only 'seqpacket_allow()' callback called to check
> support of SEQPACKET by transport.
>
> - 'af_vsock: update comments for stream sockets': commit message
> updated.
> Marked 'Reviewed-by' with that fix.
>
> - 'virtio/vsock: set packet's type in send':
> 1) Commit message updated.
> 2) Parameter 'type' from 'virtio_transport_send_credit_update()'
> also removed in this patch instead of in next.
>
> - 'virtio/vsock: dequeue callback for SOCK_SEQPACKET': SEQPACKET
> related state wrapped to special struct.
>
> - 'virtio/vsock: update trace event for SEQPACKET': format strings
> now not broken by new lines.
>
> v4 -> v5:
> - patches reorganized:
> 1) Setting of packet's type in 'virtio_transport_send_pkt_info()'
> is moved to separate patch.
> 2) Simplifying of 'virtio_transport_send_credit_update()' is
> moved to separate patch and before main virtio/vsock patches.
> - style problem fixed
> - in 'af_vsock: separate receive data loop' extra 'release_sock()'
> removed
> - added trace event fields for SEQPACKET
> - in 'af_vsock: separate wait data loop':
> 1) 'vsock_wait_data()' removed 'goto out;'
> 2) Comment for invalid data amount is changed.
> - in 'af_vsock: rest of SEQPACKET support', 'new_transport' pointer
> check is moved after 'try_module_get()'
> - in 'af_vsock: update comments for stream sockets', 'connect-oriented'
> replaced with 'connection-oriented'
> - in 'loopback/vsock: setup SEQPACKET ops for transport',
> 'loopback/vsock' replaced with 'vsock/loopback'
>
> v3 -> v4:
> - SEQPACKET specific metadata moved from packet header to payload
> and called 'virtio_vsock_seq_hdr'
> - record integrity check:
> 1) SEQ_END operation was added, which marks end of record.
> 2) Both SEQ_BEGIN and SEQ_END carries counter which is incremented
> on every marker send.
> - af_vsock.c: socket operations for STREAM and SEQPACKET call same
> functions instead of having own "gates" differs only by names:
> 'vsock_seqpacket/stream_getsockopt()' now replaced with
> 'vsock_connectible_getsockopt()'.
> - af_vsock.c: 'seqpacket_dequeue' callback returns error and flag that
> record ready. There is no need to return number of copied bytes,
> because case when record received successfully is checked at virtio
> transport layer, when SEQ_END is processed. Also user doesn't need
> number of copied bytes, because 'recv()' from SEQPACKET could return
> error, length of users's buffer or length of whole record(both are
> known in af_vsock.c).
> - af_vsock.c: both wait loops in af_vsock.c(for data and space) moved
> to separate functions because now both called from several places.
> - af_vsock.c: 'vsock_assign_transport()' checks that 'new_transport'
> pointer is not NULL and returns 'ESOCKTNOSUPPORT' instead of 'ENODEV'
> if failed to use transport.
> - tools/testing/vsock/vsock_test.c: rename tests
>
> v2 -> v3:
> - patches reorganized: split for prepare and implementation patches
> - local variables are declared in "Reverse Christmas tree" manner
> - virtio_transport_common.c: valid leXX_to_cpu() for vsock header
> fields access
> - af_vsock.c: 'vsock_connectible_*sockopt()' added as shared code
> between stream and seqpacket sockets.
> - af_vsock.c: loops in '__vsock_*_recvmsg()' refactored.
> - af_vsock.c: 'vsock_wait_data()' refactored.
>
> v1 -> v2:
> - patches reordered: af_vsock.c related changes now before virtio vsock
> - patches reorganized: more small patches, where +/- are not mixed
> - tests for SOCK_SEQPACKET added
> - all commit messages updated
> - af_vsock.c: 'vsock_pre_recv_check()' inlined to
> 'vsock_connectible_recvmsg()'
> - af_vsock.c: 'vsock_assign_transport()' returns ENODEV if transport
> was not found
> - virtio_transport_common.c: transport callback for seqpacket dequeue
> - virtio_transport_common.c: simplified
> 'virtio_transport_recv_connected()'
> - virtio_transport_common.c: send reset on socket and packet type
> mismatch.
>
>Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
>
>--
>2.25.1
>

\
 
 \ /
  Last update: 2021-03-10 11:08    [W:0.274 / U:0.876 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site