Messages in this thread Patch in this message | | | From | Keqian Zhu <> | Subject | [PATCH v2 03/11] iommu/arm-smmu-v3: Add feature detection for BBML | Date | Wed, 10 Mar 2021 17:06:06 +0800 |
| |
From: jiangkunkun <jiangkunkun@huawei.com>
When altering a translation table descriptor of some specific reasons, we require break-before-make procedure. But it might cause problems when the TTD is alive. The I/O streams might not tolerate translation faults.
If the SMMU supports BBM level 1 or BBM level 2, we can change the block size without using break-before-make sequence.
This adds feature detection for BBML, none functional change expected.
Co-developed-by: Keqian Zhu <zhukeqian1@huawei.com> Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com> ---
changelog:
v2: - Use two new quirk flags named IO_PGTABLE_QUIRK_ARM_BBML1/2 to transfer SMMU BBML feature to io-pgtable. (Robin) --- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 19 +++++++++++++++++++ drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h | 6 ++++++ include/linux/io-pgtable.h | 8 ++++++++ 3 files changed, 33 insertions(+)
diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c index 369c0ea7a104..443ac19c6da9 100644 --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c @@ -2030,6 +2030,11 @@ static int arm_smmu_domain_finalise(struct iommu_domain *domain, if (smmu->features & ARM_SMMU_FEAT_HD) pgtbl_cfg.quirks |= IO_PGTABLE_QUIRK_ARM_HD; + if (smmu->features & ARM_SMMU_FEAT_BBML1) + pgtbl_cfg.quirks |= IO_PGTABLE_QUIRK_ARM_BBML1; + else if (smmu->features & ARM_SMMU_FEAT_BBML2) + pgtbl_cfg.quirks |= IO_PGTABLE_QUIRK_ARM_BBML2; + pgtbl_ops = alloc_io_pgtable_ops(fmt, &pgtbl_cfg, smmu_domain); if (!pgtbl_ops) return -ENOMEM; @@ -3373,6 +3378,20 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu) /* IDR3 */ reg = readl_relaxed(smmu->base + ARM_SMMU_IDR3); + switch (FIELD_GET(IDR3_BBML, reg)) { + case IDR3_BBML0: + break; + case IDR3_BBML1: + smmu->features |= ARM_SMMU_FEAT_BBML1; + break; + case IDR3_BBML2: + smmu->features |= ARM_SMMU_FEAT_BBML2; + break; + default: + dev_err(smmu->dev, "unknown/unsupported BBM behavior level\n"); + return -ENXIO; + } + if (FIELD_GET(IDR3_RIL, reg)) smmu->features |= ARM_SMMU_FEAT_RANGE_INV; diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h index 26d6b935b383..a74125675544 100644 --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h @@ -54,6 +54,10 @@ #define IDR1_SIDSIZE GENMASK(5, 0) #define ARM_SMMU_IDR3 0xc +#define IDR3_BBML GENMASK(12, 11) +#define IDR3_BBML0 0 +#define IDR3_BBML1 1 +#define IDR3_BBML2 2 #define IDR3_RIL (1 << 10) #define ARM_SMMU_IDR5 0x14 @@ -615,6 +619,8 @@ struct arm_smmu_device { #define ARM_SMMU_FEAT_E2H (1 << 18) #define ARM_SMMU_FEAT_HA (1 << 19) #define ARM_SMMU_FEAT_HD (1 << 20) +#define ARM_SMMU_FEAT_BBML1 (1 << 21) +#define ARM_SMMU_FEAT_BBML2 (1 << 22) u32 features; #define ARM_SMMU_OPT_SKIP_PREFETCH (1 << 0) diff --git a/include/linux/io-pgtable.h b/include/linux/io-pgtable.h index 64cee6831c97..857932357f1d 100644 --- a/include/linux/io-pgtable.h +++ b/include/linux/io-pgtable.h @@ -84,6 +84,12 @@ struct io_pgtable_cfg { * attributes set in the TCR for a non-coherent page-table walker. * * IO_PGTABLE_QUIRK_ARM_HD: Support hardware management of dirty status. + * + * IO_PGTABLE_QUIRK_ARM_BBML1: ARM SMMU supports BBM Level 1 behavior + * when changing block size. + * + * IO_PGTABLE_QUIRK_ARM_BBML2: ARM SMMU supports BBM Level 2 behavior + * when changing block size. */ #define IO_PGTABLE_QUIRK_ARM_NS BIT(0) #define IO_PGTABLE_QUIRK_NO_PERMS BIT(1) @@ -92,6 +98,8 @@ struct io_pgtable_cfg { #define IO_PGTABLE_QUIRK_ARM_TTBR1 BIT(5) #define IO_PGTABLE_QUIRK_ARM_OUTER_WBWA BIT(6) #define IO_PGTABLE_QUIRK_ARM_HD BIT(7) + #define IO_PGTABLE_QUIRK_ARM_BBML1 BIT(8) + #define IO_PGTABLE_QUIRK_ARM_BBML2 BIT(9) unsigned long quirks; unsigned long pgsize_bitmap; unsigned int ias; -- 2.19.1
| |