lkml.org 
[lkml]   [2021]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net] net: dsa: bcm_sf2: Qualify phydev->dev_flags based on port
On Wed, Mar 10, 2021 at 02:17:58PM -0800, Florian Fainelli wrote:
> Similar to commit 92696286f3bb37ba50e4bd8d1beb24afb759a799 ("net:
> bcmgenet: Set phydev->dev_flags only for internal PHYs") we need to
> qualify the phydev->dev_flags based on whether the port is connected to
> an internal or external PHY otherwise we risk having a flags collision
> with a completely different interpretation depending on the driver.
>
> Fixes: aa9aef77c761 ("net: dsa: bcm_sf2: communicate integrated PHY revision to PHY driver")
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
> drivers/net/dsa/bcm_sf2.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
> index 1277e5f48b7f..321924a241f8 100644
> --- a/drivers/net/dsa/bcm_sf2.c
> +++ b/drivers/net/dsa/bcm_sf2.c
> @@ -643,7 +643,10 @@ static u32 bcm_sf2_sw_get_phy_flags(struct dsa_switch *ds, int port)
> * in bits 15:8 and the patch level in bits 7:0 which is exactly what
> * the REG_PHY_REVISION register layout is.
> */
> - return priv->hw_params.gphy_rev;
> + if (priv->int_phy_mask & BIT(port))
> + return priv->hw_params.gphy_rev;
> + else
> + return 0;
> }
>
> static void bcm_sf2_sw_validate(struct dsa_switch *ds, int port,
> --
> 2.25.1
>

Checkpatch probably tells you that "else" statements are not useful
after "return", but either way, this is good.

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>

\
 
 \ /
  Last update: 2021-03-11 01:38    [W:0.037 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site