lkml.org 
[lkml]   [2021]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V1 4/6] DCC: Added the sysfs entries for DCC(Data Capture and Compare) driver
On Wed 10 Mar 10:46 CST 2021, Souradeep Chowdhury wrote:

> The DCC is a DMA engine designed to store register values either in
> case of a system crash or in case of software triggers manually done
> by the user. Using DCC hardware and the sysfs interface of the driver
> the user can exploit various functionalities of DCC. The user can specify
> the register addresses, the values of which is stored by DCC in it's
> dedicated SRAM. The register addresses can be used either to read from,
> write to, first read and store value and then write or to loop. All these
> options can be exploited using the sysfs interface given to the user.
> Following are the sysfs interfaces exposed in DCC driver which are
> documented
> 1)trigger
> 2)config
> 3)config_write
> 4)config_reset
> 5)enable
> 6)rd_mod_wr
> 7)loop
>
> Signed-off-by: Souradeep Chowdhury <schowdhu@codeaurora.org>
> ---
> Documentation/ABI/testing/sysfs-driver-dcc | 74 ++++++++++++++++++++++++++++++
> 1 file changed, 74 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-driver-dcc
>
> diff --git a/Documentation/ABI/testing/sysfs-driver-dcc b/Documentation/ABI/testing/sysfs-driver-dcc
> new file mode 100644
> index 0000000..7a855ca
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-driver-dcc
> @@ -0,0 +1,74 @@
> +What: /sys/bus/platform/devices/.../trigger
> +Date: February 2021
> +Contact: Souradeep Chowdhury <schowdhu@codeaurora.org>
> +Description:
> + This file allows the software trigger to be enabled
> + by the user through the sysfs interface.Through this
> + interface the user can manually start a software trigger
> + in dcc where by the dcc driver stores the current status
> + of the specified registers in dcc sram.
> +
> +What: /sys/bus/platform/devices/.../enable
> +Date: February 2021
> +Contact: Souradeep Chowdhury <schowdhu@codeaurora.org>
> +Description:
> + This file allows the user to manually enable or
> + disable dcc driver.The dcc hardware needs to be
> + enabled before use.
> +
> +What: /sys/bus/platform/devices/.../config
> +Date: February 2021
> +Contact: Souradeep Chowdhury <schowdhu@codeaurora.org>
> +Description:
> + This file allows user to configure the register values
> + along with addresses to the dcc driver.This register
> + addresses are used to read from,write or loop through.
> + To enable all these options separate sysfs files have
> + are created.

Please describe the expected content of this file.

> +
> +What: /sys/bus/platform/devices/.../config_write
> +Date: February 2021
> +Contact: Souradeep Chowdhury <schowdhu@codeaurora.org>
> +Description:
> + This file allows user to write a value to the register
> + address given as argument.The values are entered in the
> + form of <register_address> <value>.

So it's just a generic 'write some user defined data to some user
defined register'? This doesn't sound like the typical way things are
exposed in sysfs.

> +
> +What: /sys/bus/platform/devices/.../config_reset
> +Date: February 2021
> +Contact: Souradeep Chowdhury <schowdhu@codeaurora.org>
> +Description:
> + This file is used to reset the configuration of
> + a dcc driver to the default configuration.
> +
> +What: /sys/bus/platform/devices/.../loop
> +Date: February 2021
> +Contact: Souradeep Chowdhury <schowdhu@codeaurora.org>
> +Description:
> + This file is used to enter the loop count as dcc
> + driver gives the option to loop multiple times on
> + the same register and store the values for each
> + loop.
> +
> +What: /sys/bus/platform/devices/.../rd_mod_wr
> +Date: February 2021
> +Contact: Souradeep Chowdhury <schowdhu@codeaurora.org>
> +Description:
> + This file is used to read the value of the register
> + and then write the value given as an argument to the
> + register address in config.The address argument should
> + be given of the form <mask> <value>.
> +
> +What: /sys/bus/platform/devices/.../ready
> +Date: February 2021
> +Contact: Souradeep Chowdhury <schowdhu@codeaurora.org>
> +Description:
> + This file is used to check the status of the dcc
> + hardware if it's ready to take the inputs.
> +
> +What: /sys/bus/platform/devices/.../curr_list
> +Date: February 2021
> +Contact: Souradeep Chowdhury <schowdhu@codeaurora.org>
> +Description:
> + This file is used to configure the linkedlist data
> + to be used while configuring addresses.

Please describe the format of this attr. Is it read/write?

Regards,
Bjorn

> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>

\
 
 \ /
  Last update: 2021-03-11 00:30    [W:1.080 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site