lkml.org 
[lkml]   [2021]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/5] powercap/drivers/dtpm: Scale the power with the load
Date
Currently the power consumption is based on the current OPP power
assuming the entire performance domain is fully loaded.

That gives very gross power estimation and we can do much better by
using the load to scale the power consumption.

Use the utilization to normalize and scale the power usage over the
max possible power.

Tested on a rock960 with 2 big CPUS, the power consumption estimation
conforms with the expected one.

Before this change:

~$ ~/dhrystone -t 1 -l 10000&
~$ cat /sys/devices/virtual/powercap/dtpm/dtpm:0/dtpm:0:1/constraint_0_max_power_uw
2260000

After this change:

~$ ~/dhrystone -t 1 -l 10000&
~$ cat /sys/devices/virtual/powercap/dtpm/dtpm:0/dtpm:0:1/constraint_0_max_power_uw
1130000

~$ ~/dhrystone -t 2 -l 10000&
~$ cat /sys/devices/virtual/powercap/dtpm/dtpm:0/dtpm:0:1/constraint_0_max_power_uw
2260000

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/powercap/dtpm_cpu.c | 21 +++++++++++++++++----
1 file changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/powercap/dtpm_cpu.c b/drivers/powercap/dtpm_cpu.c
index e728ebd6d0ca..8379b96468ef 100644
--- a/drivers/powercap/dtpm_cpu.c
+++ b/drivers/powercap/dtpm_cpu.c
@@ -68,27 +68,40 @@ static u64 set_pd_power_limit(struct dtpm *dtpm, u64 power_limit)
return power_limit;
}

+static u64 scale_pd_power_uw(struct cpumask *cpus, u64 power)
+{
+ unsigned long max, util;
+ int cpu, load = 0;
+
+ for_each_cpu(cpu, cpus) {
+ max = arch_scale_cpu_capacity(cpu);
+ util = sched_cpu_util(cpu, max);
+ load += ((util * 100) / max);
+ }
+
+ return (power * load) / 100;
+}
+
static u64 get_pd_power_uw(struct dtpm *dtpm)
{
struct dtpm_cpu *dtpm_cpu = to_dtpm_cpu(dtpm);
struct em_perf_domain *pd;
struct cpumask cpus;
unsigned long freq;
- int i, nr_cpus;
+ int i;

pd = em_cpu_get(dtpm_cpu->cpu);
freq = cpufreq_quick_get(dtpm_cpu->cpu);

cpumask_and(&cpus, cpu_online_mask, to_cpumask(pd->cpus));
- nr_cpus = cpumask_weight(&cpus);

for (i = 0; i < pd->nr_perf_states; i++) {

if (pd->table[i].frequency < freq)
continue;

- return pd->table[i].power *
- MICROWATT_PER_MILLIWATT * nr_cpus;
+ return scale_pd_power_uw(&cpus, pd->table[i].power *
+ MICROWATT_PER_MILLIWATT);
}

return 0;
--
2.17.1
\
 
 \ /
  Last update: 2021-03-02 15:11    [W:0.232 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site