lkml.org 
[lkml]   [2021]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 01/13] arm64: dts: qcom: sc7180: Update dts for DP phy inside QMP phy
Date
From: Stephen Boyd <swboyd@chromium.org>

Drop the old node and add the new one in its place.

Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Vara Reddy <varar@codeaurora.org>
Cc: Tanmay Shah <tanmay@codeaurora.org>
Cc: Rob Clark <robdclark@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
[dianders: Adjusted due to DP not itself not in upstream dts yet]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

(no changes since v1)

arch/arm64/boot/dts/qcom/sc7180.dtsi | 23 ++++++++++++++++-------
1 file changed, 16 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 1ea3344ab62c..60248a6757d8 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2770,12 +2770,11 @@ usb_1_hsphy: phy@88e3000 {
};

usb_1_qmpphy: phy-wrapper@88e9000 {
- compatible = "qcom,sc7180-qmp-usb3-phy";
+ compatible = "qcom,sc7180-qmp-usb3-dp-phy";
reg = <0 0x088e9000 0 0x18c>,
- <0 0x088e8000 0 0x38>;
- reg-names = "reg-base", "dp_com";
+ <0 0x088e8000 0 0x38>,
+ <0 0x088ea000 0 0x40>;
status = "disabled";
- #clock-cells = <1>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -2790,7 +2789,7 @@ usb_1_qmpphy: phy-wrapper@88e9000 {
<&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
reset-names = "phy", "common";

- usb_1_ssphy: phy@88e9200 {
+ usb_1_ssphy: usb3-phy@88e9200 {
reg = <0 0x088e9200 0 0x128>,
<0 0x088e9400 0 0x200>,
<0 0x088e9c00 0 0x218>,
@@ -2803,6 +2802,16 @@ usb_1_ssphy: phy@88e9200 {
clock-names = "pipe0";
clock-output-names = "usb3_phy_pipe_clk_src";
};
+
+ dp_phy: dp-phy@88ea200 {
+ reg = <0 0x088ea200 0 0x200>,
+ <0 0x088ea400 0 0x200>,
+ <0 0x088eaa00 0 0x200>,
+ <0 0x088ea600 0 0x200>,
+ <0 0x088ea800 0 0x200>;
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+ };
};

dc_noc: interconnect@9160000 {
@@ -3166,8 +3175,8 @@ dispcc: clock-controller@af00000 {
<&gcc GCC_DISP_GPLL0_CLK_SRC>,
<&dsi_phy 0>,
<&dsi_phy 1>,
- <0>,
- <0>;
+ <&dp_phy 0>,
+ <&dp_phy 1>;
clock-names = "bi_tcxo",
"gcc_disp_gpll0_clk_src",
"dsi0_phy_pll_out_byteclk",
--
2.30.1.766.gb4fecdf3b7-goog
\
 
 \ /
  Last update: 2021-03-02 15:11    [W:0.161 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site