lkml.org 
[lkml]   [2021]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V2 2/2] backlight: qcom-wled: Correct the sync_toggle sequence
On Mon, Mar 01, 2021 at 02:15:12PM +0530, kgunda@codeaurora.org wrote:
> On 2021-02-26 22:56, Daniel Thompson wrote:
> > On Fri, Feb 26, 2021 at 05:42:24PM +0530, Kiran Gunda wrote:
> > > As per the current implementation, after FSC (Full Scale Current)
> > > and brightness update the sync bits are transitioned from 1 to 0.
> >
> > This still seems to incorrectly describe the current behaviour.
> >
> > Surely in most cases (i.e. every time except the first) the value of the
> > sync bit is 0 when the function is called and we get both a 0 to 1
> > and then a 1 to 0 transition.
> >
> > That is why I recommended set-then-clear terminology to describe the
> > current behaviour. It is concise and correct.
>
> Okay. Actually I have mentioned the "clear-and-set" in explaining the fix.
> Let me modify the same terminology in explaining the problem case also.

Yes please.

In my original review I took time to explain why patch descriptions
require care and attention and, also, why expressing the original behaviour
as 1 to 0 was inadequate. Based on the previous feedback (and reply) I
was rather surprised that the problem was only half corrected in the
next revision.


Daniel.

\
 
 \ /
  Last update: 2021-03-01 10:42    [W:0.578 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site