lkml.org 
[lkml]   [2021]   [Feb]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 9/9] net: phy: icplus: add MDI/MDIX support for IP101A/G
Date
Implement the operations to set desired mode and retrieve the current
mode.

This feature was tested with an IP101G.

Signed-off-by: Michael Walle <michael@walle.cc>
---
drivers/net/phy/icplus.c | 91 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 91 insertions(+)

diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index d1b57d81f281..a2fee2d08ec2 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -37,12 +37,17 @@ MODULE_LICENSE("GPL");
#define IP1001_SPEC_CTRL_STATUS_2 20 /* IP1001 Spec. Control Reg 2 */
#define IP1001_APS_ON 11 /* IP1001 APS Mode bit */
#define IP101A_G_APS_ON BIT(1) /* IP101A/G APS Mode bit */
+#define IP101A_G_AUTO_MDIX_DIS BIT(11)
#define IP101A_G_IRQ_CONF_STATUS 0x11 /* Conf Info IRQ & Status Reg */
#define IP101A_G_IRQ_PIN_USED BIT(15) /* INTR pin used */
#define IP101A_G_IRQ_ALL_MASK BIT(11) /* IRQ's inactive */
#define IP101A_G_IRQ_SPEED_CHANGE BIT(2)
#define IP101A_G_IRQ_DUPLEX_CHANGE BIT(1)
#define IP101A_G_IRQ_LINK_CHANGE BIT(0)
+#define IP101A_G_PHY_STATUS 18
+#define IP101A_G_MDIX BIT(9)
+#define IP101A_G_PHY_SPEC_CTRL 30
+#define IP101A_G_FORCE_MDIX BIT(3)

#define IP101G_PAGE_CONTROL 0x14
#define IP101G_PAGE_CONTROL_MASK GENMASK(4, 0)
@@ -327,6 +332,90 @@ static int ip101a_g_config_init(struct phy_device *phydev)
return phy_restore_page(phydev, oldpage, err);
}

+static int ip101a_g_read_status(struct phy_device *phydev)
+{
+ int oldpage, ret, stat1, stat2;
+
+ ret = genphy_read_status(phydev);
+ if (ret)
+ return ret;
+
+ oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE);
+
+ ret = __phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
+ if (ret < 0)
+ goto out;
+ stat1 = ret;
+
+ ret = __phy_read(phydev, IP101A_G_PHY_SPEC_CTRL);
+ if (ret < 0)
+ goto out;
+ stat2 = ret;
+
+ if (stat1 & IP101A_G_AUTO_MDIX_DIS) {
+ if (stat2 & IP101A_G_FORCE_MDIX)
+ phydev->mdix_ctrl = ETH_TP_MDI_X;
+ else
+ phydev->mdix_ctrl = ETH_TP_MDI;
+ } else {
+ phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
+ }
+
+ if (stat2 & IP101A_G_MDIX)
+ phydev->mdix = ETH_TP_MDI_X;
+ else
+ phydev->mdix = ETH_TP_MDI;
+
+ ret = 0;
+
+out:
+ return phy_restore_page(phydev, oldpage, ret);
+}
+
+static int ip101a_g_config_mdix(struct phy_device *phydev)
+{
+ u16 ctrl = 0, ctrl2 = 0;
+ int oldpage, ret;
+
+ switch (phydev->mdix_ctrl) {
+ case ETH_TP_MDI:
+ ctrl = IP101A_G_AUTO_MDIX_DIS;
+ break;
+ case ETH_TP_MDI_X:
+ ctrl = IP101A_G_AUTO_MDIX_DIS;
+ ctrl2 = IP101A_G_FORCE_MDIX;
+ break;
+ case ETH_TP_MDI_AUTO:
+ break;
+ default:
+ return 0;
+ }
+
+ oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE);
+
+ ret = __phy_modify(phydev, IP10XX_SPEC_CTRL_STATUS,
+ IP101A_G_AUTO_MDIX_DIS, ctrl);
+ if (ret)
+ goto out;
+
+ ret = __phy_modify(phydev, IP101A_G_PHY_SPEC_CTRL,
+ IP101A_G_FORCE_MDIX, ctrl2);
+
+out:
+ return phy_restore_page(phydev, oldpage, ret);
+}
+
+static int ip101a_g_config_aneg(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = ip101a_g_config_mdix(phydev);
+ if (ret)
+ return ret;
+
+ return genphy_config_aneg(phydev);
+}
+
static int ip101a_g_ack_interrupt(struct phy_device *phydev)
{
int err = phy_read(phydev, IP101A_G_IRQ_CONF_STATUS);
@@ -474,6 +563,8 @@ static struct phy_driver icplus_driver[] = {
.config_intr = ip101a_g_config_intr,
.handle_interrupt = ip101a_g_handle_interrupt,
.config_init = ip101a_g_config_init,
+ .config_aneg = ip101a_g_config_aneg,
+ .read_status = ip101a_g_read_status,
.read_page = ip101a_g_read_page,
.write_page = ip101a_g_write_page,
.soft_reset = genphy_soft_reset,
--
2.20.1
\
 
 \ /
  Last update: 2021-02-09 17:46    [W:0.215 / U:1.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site