lkml.org 
[lkml]   [2021]   [Feb]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH v1 02/41] powerpc/40x: Don't use SPRN_SPRG_SCRATCH0/1 in TLB miss handlers
Date
SPRN_SPRG_SCRATCH5 is used to save SPRN_PID.
SPRN_SPRG_SCRATCH6 is already available.

SPRN_PID is only 8 bits. We have r12 that contains CR.
We only need to preserve CR0, so we have space available in r12
to save PID.

Keep PID in r12 and free up SPRN_SPRG_SCRATCH5.

Then In TLB miss handlers, instead of using SPRN_SPRG_SCRATCH0 and
SPRN_SPRG_SCRATCH1, use SPRN_SPRG_SCRATCH5 and SPRN_SPRG_SCRATCH6
to avoid future conflicts with normal exception prologs.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/powerpc/kernel/head_40x.S | 39 ++++++++++++++++------------------
1 file changed, 18 insertions(+), 21 deletions(-)

diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index 24724a7dad49..383238a98f77 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -249,13 +249,13 @@ _ENTRY(saved_ksp_limit)
* load TLB entries from the page table if they exist.
*/
START_EXCEPTION(0x1100, DTLBMiss)
- mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */
- mtspr SPRN_SPRG_SCRATCH1, r11
+ mtspr SPRN_SPRG_SCRATCH5, r10 /* Save some working registers */
+ mtspr SPRN_SPRG_SCRATCH6, r11
mtspr SPRN_SPRG_SCRATCH3, r12
mtspr SPRN_SPRG_SCRATCH4, r9
mfcr r12
mfspr r9, SPRN_PID
- mtspr SPRN_SPRG_SCRATCH5, r9
+ rlwimi r12, r9, 0, 0xff
mfspr r10, SPRN_DEAR /* Get faulting address */

/* If we are faulting a kernel address, we have to use the
@@ -316,13 +316,12 @@ _ENTRY(saved_ksp_limit)
/* The bailout. Restore registers to pre-exception conditions
* and call the heavyweights to help us out.
*/
- mfspr r9, SPRN_SPRG_SCRATCH5
- mtspr SPRN_PID, r9
- mtcr r12
+ mtspr SPRN_PID, r12
+ mtcrf 0x80, r12
mfspr r9, SPRN_SPRG_SCRATCH4
mfspr r12, SPRN_SPRG_SCRATCH3
- mfspr r11, SPRN_SPRG_SCRATCH1
- mfspr r10, SPRN_SPRG_SCRATCH0
+ mfspr r11, SPRN_SPRG_SCRATCH6
+ mfspr r10, SPRN_SPRG_SCRATCH5
b DataStorage

/* 0x1200 - Instruction TLB Miss Exception
@@ -330,13 +329,13 @@ _ENTRY(saved_ksp_limit)
* registers and bailout to a different point.
*/
START_EXCEPTION(0x1200, ITLBMiss)
- mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */
- mtspr SPRN_SPRG_SCRATCH1, r11
+ mtspr SPRN_SPRG_SCRATCH5, r10 /* Save some working registers */
+ mtspr SPRN_SPRG_SCRATCH6, r11
mtspr SPRN_SPRG_SCRATCH3, r12
mtspr SPRN_SPRG_SCRATCH4, r9
mfcr r12
mfspr r9, SPRN_PID
- mtspr SPRN_SPRG_SCRATCH5, r9
+ rlwimi r12, r9, 0, 0xff
mfspr r10, SPRN_SRR0 /* Get faulting address */

/* If we are faulting a kernel address, we have to use the
@@ -397,13 +396,12 @@ _ENTRY(saved_ksp_limit)
/* The bailout. Restore registers to pre-exception conditions
* and call the heavyweights to help us out.
*/
- mfspr r9, SPRN_SPRG_SCRATCH5
- mtspr SPRN_PID, r9
- mtcr r12
+ mtspr SPRN_PID, r12
+ mtcrf 0x80, r12
mfspr r9, SPRN_SPRG_SCRATCH4
mfspr r12, SPRN_SPRG_SCRATCH3
- mfspr r11, SPRN_SPRG_SCRATCH1
- mfspr r10, SPRN_SPRG_SCRATCH0
+ mfspr r11, SPRN_SPRG_SCRATCH6
+ mfspr r10, SPRN_SPRG_SCRATCH5
b InstructionAccess

EXCEPTION(0x1300, Trap_13, unknown_exception, EXC_XFER_STD)
@@ -543,13 +541,12 @@ finish_tlb_load:

/* Done...restore registers and get out of here.
*/
- mfspr r9, SPRN_SPRG_SCRATCH5
- mtspr SPRN_PID, r9
- mtcr r12
+ mtspr SPRN_PID, r12
+ mtcrf 0x80, r12
mfspr r9, SPRN_SPRG_SCRATCH4
mfspr r12, SPRN_SPRG_SCRATCH3
- mfspr r11, SPRN_SPRG_SCRATCH1
- mfspr r10, SPRN_SPRG_SCRATCH0
+ mfspr r11, SPRN_SPRG_SCRATCH6
+ mfspr r10, SPRN_SPRG_SCRATCH5
rfi /* Should sync shadow TLBs */
b . /* prevent prefetch past rfi */

--
2.25.0
\
 
 \ /
  Last update: 2021-02-09 11:02    [W:0.184 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site