[lkml]   [2021]   [Feb]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH net-next 7/9] net: phy: icplus: select page before writing control register
On Tue, Feb 09, 2021 at 05:40:49PM +0100, Michael Walle wrote:
> Registers >= 16 are paged. Be sure to set the page. It seems this was
> working for now, because the default is correct for the registers used
> in the driver at the moment. But this will also assume, nobody will
> change the page select register before linux is started. The page select
> register is _not_ reset with a soft reset of the PHY.
> Add read_page()/write_page() support for the IP101G and use it
> accordingly.
> Signed-off-by: Michael Walle <>

Reviewed-by: Andrew Lunn <>


 \ /
  Last update: 2021-02-10 03:33    [W:0.190 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site