lkml.org 
[lkml]   [2021]   [Feb]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH mvebu v2 00/10] Armada 37xx: Fix cpufreq changing b ase CPU speed to 800 MHz from 1000 MHz
> If you have other Armada 3720 boards (Espressobin v5/v7, uDPU, Devel Board, ...) then it will be nice to do an additional tests and check if instability issues are finally fixed.

These patches applied to the 5.4.96 in OpenWrt (98d61b5) work fine so far on an Espressobin v7 AFAICT per changing values in /sys/devices/system/cpu/cpufreq/policy0.

Are these changes intended to work @1.2 GHz on the v7?

I have the beige case and heat-sinks with paste on the board, and the power adapter is the Fairway for 2.0A.

However, the device hangs fairly quickly under load with firmware flashed of the built as below:

diff --git a/package/boot/arm-trusted-firmware-mvebu/Makefile b/package/boot/arm-trusted-firmware-mvebu/Makefile
index c4669edb52..20899c29e7 100644
--- a/package/boot/arm-trusted-firmware-mvebu/Makefile
+++ b/package/boot/arm-trusted-firmware-mvebu/Makefile
@@ -72,7 +72,7 @@ define Trusted-Firmware-A/espressobin-v7-1gb
BUILD_DEVICES:=globalscale_espressobin-v7
UBOOT:=espressobin
DDR_TOPOLOGY:=5
- CLOCKSPRESET:=CPU_1000_DDR_800
+ CLOCKSPRESET:=CPU_1200_DDR_750
PLAT:=a3700
endef

See: https://github.com/openwrt/openwrt/commit/5fae94d987f2261b148c035130a00350c905a13e
\
 
 \ /
  Last update: 2021-02-10 01:49    [W:0.959 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site