lkml.org 
[lkml]   [2021]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1] vdpa/mlx5: Restore the hardware used index after change map
On Mon, Feb 08, 2021 at 05:04:27PM +0800, Jason Wang wrote:
>
> On 2021/2/8 下午2:37, Eli Cohen wrote:
> > On Mon, Feb 08, 2021 at 12:27:18PM +0800, Jason Wang wrote:
> > > On 2021/2/6 上午7:07, Si-Wei Liu wrote:
> > > >
> > > > On 2/3/2021 11:36 PM, Eli Cohen wrote:
> > > > > When a change of memory map occurs, the hardware resources are destroyed
> > > > > and then re-created again with the new memory map. In such case, we need
> > > > > to restore the hardware available and used indices. The driver failed to
> > > > > restore the used index which is added here.
> > > > >
> > > > > Also, since the driver also fails to reset the available and used
> > > > > indices upon device reset, fix this here to avoid regression caused by
> > > > > the fact that used index may not be zero upon device reset.
> > > > >
> > > > > Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5
> > > > > devices")
> > > > > Signed-off-by: Eli Cohen <elic@nvidia.com>
> > > > > ---
> > > > > v0 -> v1:
> > > > > Clear indices upon device reset
> > > > >
> > > > >   drivers/vdpa/mlx5/net/mlx5_vnet.c | 18 ++++++++++++++++++
> > > > >   1 file changed, 18 insertions(+)
> > > > >
> > > > > diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c
> > > > > b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> > > > > index 88dde3455bfd..b5fe6d2ad22f 100644
> > > > > --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
> > > > > +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> > > > > @@ -87,6 +87,7 @@ struct mlx5_vq_restore_info {
> > > > >       u64 device_addr;
> > > > >       u64 driver_addr;
> > > > >       u16 avail_index;
> > > > > +    u16 used_index;
> > > > >       bool ready;
> > > > >       struct vdpa_callback cb;
> > > > >       bool restore;
> > > > > @@ -121,6 +122,7 @@ struct mlx5_vdpa_virtqueue {
> > > > >       u32 virtq_id;
> > > > >       struct mlx5_vdpa_net *ndev;
> > > > >       u16 avail_idx;
> > > > > +    u16 used_idx;
> > > > >       int fw_state;
> > > > >         /* keep last in the struct */
> > > > > @@ -804,6 +806,7 @@ static int create_virtqueue(struct mlx5_vdpa_net
> > > > > *ndev, struct mlx5_vdpa_virtque
> > > > >         obj_context = MLX5_ADDR_OF(create_virtio_net_q_in, in,
> > > > > obj_context);
> > > > >       MLX5_SET(virtio_net_q_object, obj_context, hw_available_index,
> > > > > mvq->avail_idx);
> > > > > +    MLX5_SET(virtio_net_q_object, obj_context, hw_used_index,
> > > > > mvq->used_idx);
> > > > >       MLX5_SET(virtio_net_q_object, obj_context,
> > > > > queue_feature_bit_mask_12_3,
> > > > >            get_features_12_3(ndev->mvdev.actual_features));
> > > > >       vq_ctx = MLX5_ADDR_OF(virtio_net_q_object, obj_context,
> > > > > virtio_q_context);
> > > > > @@ -1022,6 +1025,7 @@ static int connect_qps(struct mlx5_vdpa_net
> > > > > *ndev, struct mlx5_vdpa_virtqueue *m
> > > > >   struct mlx5_virtq_attr {
> > > > >       u8 state;
> > > > >       u16 available_index;
> > > > > +    u16 used_index;
> > > > >   };
> > > > >     static int query_virtqueue(struct mlx5_vdpa_net *ndev, struct
> > > > > mlx5_vdpa_virtqueue *mvq,
> > > > > @@ -1052,6 +1056,7 @@ static int query_virtqueue(struct
> > > > > mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueu
> > > > >       memset(attr, 0, sizeof(*attr));
> > > > >       attr->state = MLX5_GET(virtio_net_q_object, obj_context, state);
> > > > >       attr->available_index = MLX5_GET(virtio_net_q_object,
> > > > > obj_context, hw_available_index);
> > > > > +    attr->used_index = MLX5_GET(virtio_net_q_object, obj_context,
> > > > > hw_used_index);
> > > > >       kfree(out);
> > > > >       return 0;
> > > > >   @@ -1535,6 +1540,16 @@ static void teardown_virtqueues(struct
> > > > > mlx5_vdpa_net *ndev)
> > > > >       }
> > > > >   }
> > > > >   +static void clear_virtqueues(struct mlx5_vdpa_net *ndev)
> > > > > +{
> > > > > +    int i;
> > > > > +
> > > > > +    for (i = ndev->mvdev.max_vqs - 1; i >= 0; i--) {
> > > > > +        ndev->vqs[i].avail_idx = 0;
> > > > > +        ndev->vqs[i].used_idx = 0;
> > > > > +    }
> > > > > +}
> > > > > +
> > > > >   /* TODO: cross-endian support */
> > > > >   static inline bool mlx5_vdpa_is_little_endian(struct mlx5_vdpa_dev
> > > > > *mvdev)
> > > > >   {
> > > > > @@ -1610,6 +1625,7 @@ static int save_channel_info(struct
> > > > > mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqu
> > > > >           return err;
> > > > >         ri->avail_index = attr.available_index;
> > > > > +    ri->used_index = attr.used_index;
> > > > >       ri->ready = mvq->ready;
> > > > >       ri->num_ent = mvq->num_ent;
> > > > >       ri->desc_addr = mvq->desc_addr;
> > > > > @@ -1654,6 +1670,7 @@ static void restore_channels_info(struct
> > > > > mlx5_vdpa_net *ndev)
> > > > >               continue;
> > > > >             mvq->avail_idx = ri->avail_index;
> > > > > +        mvq->used_idx = ri->used_index;
> > > > >           mvq->ready = ri->ready;
> > > > >           mvq->num_ent = ri->num_ent;
> > > > >           mvq->desc_addr = ri->desc_addr;
> > > > > @@ -1768,6 +1785,7 @@ static void mlx5_vdpa_set_status(struct
> > > > > vdpa_device *vdev, u8 status)
> > > > >       if (!status) {
> > > > >           mlx5_vdpa_info(mvdev, "performing device reset\n");
> > > > >           teardown_driver(ndev);
> > > > > +        clear_virtqueues(ndev);
> > > > The clearing looks fine at the first glance, as it aligns with the other
> > > > state cleanups floating around at the same place. However, the thing is
> > > > get_vq_state() is supposed to be called right after to get sync'ed with
> > > > the latest internal avail_index from device while vq is stopped. The
> > > > index was saved in the driver software at vq suspension, but before the
> > > > virtq object is destroyed. We shouldn't clear the avail_index too early.
> > >
> > > Good point.
> > >
> > > There's a limitation on the virtio spec and vDPA framework that we can not
> > > simply differ device suspending from device reset.
> > >
> > Are you talking about live migration where you reset the device but
> > still want to know how far it progressed in order to continue from the
> > same place in the new VM?
>
>
> Yes. So if we want to support live migration at we need:
>
> in src node:
> 1) suspend the device
> 2) get last_avail_idx via get_vq_state()
>
> in the dst node:
> 3) set last_avail_idx via set_vq_state()
> 4) resume the device
>
> So you can see, step 2 requires the device/driver not to forget the
> last_avail_idx.
>
> The annoying thing is that, in the virtio spec there's no definition of
> device suspending. So we reuse set_status(0) right now for vq suspending.
> Then if we forget last_avail_idx in set_status(0), it will break the
> assumption of step 2).
>
>
> >
> > > Need to think about that. I suggest a new state in [1], the issue is that
> > > people doesn't like the asynchronous API that it introduces.
> > >
> > >
> > > > Possibly it can be postponed to where VIRTIO_CONFIG_S_DRIVER_OK gets set
> > > > again, i.e. right before the setup_driver() in mlx5_vdpa_set_status()?
> > >
> > > Looks like a good workaround.
>
>
> Rethink of this, this won't work for the step 4), if we reuse the S_DRING_OK
> for resuming.
>
> The most clean way is to invent the feature in virtio spec and implement
> that in the driver.
>
> Thanks

Given it's between parts of device (between qemu and host kernel)
I don't think we need it in the spec even. Just add a new ioctl.


>
>
> > >
> > > Thanks
> > >
> > >
> > > > -Siwei
> > >
> > > [1]
> > > https://lists.oasis-open.org/archives/virtio-comment/202012/msg00029.html
> > >
> > >
> > > > > mlx5_vdpa_destroy_mr(&ndev->mvdev);
> > > > >           ndev->mvdev.status = 0;
> > > > >           ndev->mvdev.mlx_features = 0;

\
 
 \ /
  Last update: 2021-02-08 10:43    [W:0.074 / U:0.648 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site