lkml.org 
[lkml]   [2021]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 1/3] drm/mediatek: mtk_dpi: Add check for max clock rate in mode_valid
Hi, Jitao:

Jitao Shi <jitao.shi@mediatek.com> 於 2021年2月8日 週一 上午9:42寫道:
>
> Add per-platform max clock rate check in mtk_dpi_bridge_mode_valid.

Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

>
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_dpi.c | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 52f11a63a330..ffa4a0f1989f 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -118,6 +118,7 @@ struct mtk_dpi_yc_limit {
> struct mtk_dpi_conf {
> unsigned int (*cal_factor)(int clock);
> u32 reg_h_fre_con;
> + u32 max_clock_khz;
> bool edge_sel_en;
> };
>
> @@ -555,9 +556,22 @@ static void mtk_dpi_bridge_enable(struct drm_bridge *bridge)
> mtk_dpi_set_display_mode(dpi, &dpi->mode);
> }
>
> +static enum drm_mode_status
> +mtk_dpi_bridge_mode_valid(struct drm_bridge *bridge,
> + const struct drm_display_mode *mode)
> +{
> + struct mtk_dpi *dpi = bridge_to_dpi(bridge);
> +
> + if (dpi->conf->max_clock_khz && mode->clock > dpi->conf->max_clock_khz)
> + return MODE_CLOCK_HIGH;
> +
> + return MODE_OK;
> +}
> +
> static const struct drm_bridge_funcs mtk_dpi_bridge_funcs = {
> .attach = mtk_dpi_bridge_attach,
> .mode_set = mtk_dpi_bridge_mode_set,
> + .mode_valid = mtk_dpi_bridge_mode_valid,
> .disable = mtk_dpi_bridge_disable,
> .enable = mtk_dpi_bridge_enable,
> };
> @@ -673,17 +687,20 @@ static unsigned int mt8183_calculate_factor(int clock)
> static const struct mtk_dpi_conf mt8173_conf = {
> .cal_factor = mt8173_calculate_factor,
> .reg_h_fre_con = 0xe0,
> + .max_clock_khz = 300000,
> };
>
> static const struct mtk_dpi_conf mt2701_conf = {
> .cal_factor = mt2701_calculate_factor,
> .reg_h_fre_con = 0xb0,
> .edge_sel_en = true,
> + .max_clock_khz = 150000,
> };
>
> static const struct mtk_dpi_conf mt8183_conf = {
> .cal_factor = mt8183_calculate_factor,
> .reg_h_fre_con = 0xe0,
> + .max_clock_khz = 100000,
> };
>
> static int mtk_dpi_probe(struct platform_device *pdev)
> --
> 2.25.1

\
 
 \ /
  Last update: 2021-02-09 01:15    [W:0.143 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site