[lkml]   [2021]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] spmi: spmi-pmic-arb: Fix hw_irq overflow
Quoting Subbaraman Narayanamurthy (2021-02-08 11:33:04)
> Currently, when handling the SPMI summary interrupt, the hw_irq
> number is calculated based on SID, Peripheral ID, IRQ index and
> APID. This is then passed to irq_find_mapping() to see if a
> mapping exists for this hw_irq and if available, invoke the
> interrupt handler. Since the IRQ index uses an "int" type, hw_irq
> which is of unsigned long data type can take a large value when
> SID has its MSB set to 1 and the type conversion happens. Because
> of this, irq_find_mapping() returns 0 as there is no mapping
> for this hw_irq. This ends up invoking cleanup_irq() as if
> the interrupt is spurious whereas it is actually a valid
> interrupt. Fix this by using the proper data type (u32) for id.
> Cc:
> Signed-off-by: Subbaraman Narayanamurthy <>
> ---

Applied to spmi-next

 \ /
  Last update: 2021-02-08 23:09    [W:0.091 / U:1.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site