lkml.org 
[lkml]   [2021]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V3 2/2] ata: ahci: ceva: Update the driver to support xilinx GT phy
Date
SATA controller used in Xilinx ZynqMP platform uses xilinx GT phy
which has 4 GT lanes and can be used by 4 peripherals at a time.
SATA controller uses 1 GT phy lane among the 4 GT lanes. To configure
the GT lane for the SATA controller, the below sequence is expected.

1. Assert the SATA controller reset.
2. Configure the xilinx GT phy lane for SATA controller (phy_init).
3. De-assert the SATA controller reset.
4. Wait for PLL of the GT lane used by SATA to be locked (phy_power_on).

The ahci_platform_enable_resources() by default does the phy_init()
and phy_power_on() but the default sequence doesn't work with Xilinx
platforms. Because of this reason, updated the driver to support the
new sequence.

Added cevapriv->rst check, for backward compatibility with the older
sequence. If the reset controller is not available, then the SATA
controller will configure with the older sequences.

Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
---
drivers/ata/ahci_ceva.c | 43 ++++++++++++++++++++++++++++++++++++++++---
1 file changed, 40 insertions(+), 3 deletions(-)

diff --git a/drivers/ata/ahci_ceva.c b/drivers/ata/ahci_ceva.c
index b10fd4c..b980218 100644
--- a/drivers/ata/ahci_ceva.c
+++ b/drivers/ata/ahci_ceva.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
+#include <linux/reset.h>
#include "ahci.h"

/* Vendor Specific Register Offsets */
@@ -87,6 +88,7 @@ struct ceva_ahci_priv {
u32 axicc;
bool is_cci_enabled;
int flags;
+ struct reset_control *rst;
};

static unsigned int ceva_ahci_read_id(struct ata_device *dev,
@@ -202,13 +204,48 @@ static int ceva_ahci_probe(struct platform_device *pdev)

cevapriv->ahci_pdev = pdev;

+ cevapriv->rst = devm_reset_control_get_optional_exclusive(&pdev->dev,
+ NULL);
+ if (IS_ERR(cevapriv->rst)) {
+ if (PTR_ERR(cevapriv->rst) != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "failed to get reset: %ld\n",
+ PTR_ERR(cevapriv->rst));
+ }
+
hpriv = ahci_platform_get_resources(pdev, 0);
if (IS_ERR(hpriv))
return PTR_ERR(hpriv);

- rc = ahci_platform_enable_resources(hpriv);
- if (rc)
- return rc;
+ if (!cevapriv->rst) {
+ rc = ahci_platform_enable_resources(hpriv);
+ if (rc)
+ return rc;
+ } else {
+ int i;
+
+ rc = ahci_platform_enable_clks(hpriv);
+ if (rc)
+ return rc;
+ /* Assert the controller reset */
+ reset_control_assert(cevapriv->rst);
+
+ for (i = 0; i < hpriv->nports; i++) {
+ rc = phy_init(hpriv->phys[i]);
+ if (rc)
+ return rc;
+ }
+
+ /* De-assert the controller reset */
+ reset_control_deassert(cevapriv->rst);
+
+ for (i = 0; i < hpriv->nports; i++) {
+ rc = phy_power_on(hpriv->phys[i]);
+ if (rc) {
+ phy_exit(hpriv->phys[i]);
+ return rc;
+ }
+ }
+ }

if (of_property_read_bool(np, "ceva,broken-gen2"))
cevapriv->flags = CEVA_FLAG_BROKEN_GEN2;
--
2.7.4
\
 
 \ /
  Last update: 2021-02-08 20:22    [W:0.228 / U:1.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site