Messages in this thread |  | | From | Alain Volmat <> | Subject | [PATCH v2 0/8] spi: stm32: fix and enhancements for spi-stm32 | Date | Fri, 5 Feb 2021 19:59:24 +0100 |
| |
The serie provides a fix for the spi-stm32 driver, allowing to properly handle 0 byte transfer (and thus being able to run spi-loopback-test).
In addition to that, important enhancements are implemented, among them, supporting transfer larger that what the IP can setup in one go or allowing to use the SPI bus without cs_gpio.
v2: Fix within patch 'spi: stm32: properly handle 0 byte transfer' Reorder patches to avoid compilation issue
Alain Volmat (5): spi: stm32: properly handle 0 byte transfer spi: stm32: do not mandate cs_gpio spi: stm32h7: ensure message are smaller than max size spi: stm32: defer probe for reset spi: stm32: make spurious and overrun interrupts visible
Amelie Delaunay (2): spi: stm32: use bitfield macros spi: stm32h7: replace private SPI_1HZ_NS with NSEC_PER_SEC
Etienne Carriere (1): spi: stm32: driver uses reset controller only at init
drivers/spi/spi-stm32.c | 114 ++++++++++++++++++---------------------- 1 file changed, 52 insertions(+), 62 deletions(-)
-- 2.17.1
|  |