lkml.org 
[lkml]   [2021]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/8] spi: stm32: fix and enhancements for spi-stm32
Date
The serie provides a fix for the spi-stm32 driver, allowing to properly
handle 0 byte transfer (and thus being able to run spi-loopback-test).

In addition to that, important enhancements are implemented, among them,
supporting transfer larger that what the IP can setup in one go or
allowing to use the SPI bus without cs_gpio.

Alain Volmat (5):
spi: stm32: properly handle 0 byte transfer
spi: stm32: do not mandate cs_gpio
spi: stm32h7: ensure message are smaller than max size
spi: stm32: defer probe for reset
spi: stm32: make spurious and overrun interrupts visible

Amelie Delaunay (2):
spi: stm32: use bitfield macros
spi: stm32h7: replace private SPI_1HZ_NS with NSEC_PER_SEC

Etienne Carriere (1):
spi: stm32: driver uses reset controller only at init

drivers/spi/spi-stm32.c | 116 +++++++++++++++++++---------------------
1 file changed, 54 insertions(+), 62 deletions(-)

--
2.17.1

\
 
 \ /
  Last update: 2021-02-05 12:20    [W:0.075 / U:2.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site