lkml.org 
[lkml]   [2021]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] staging: fbtft replaced udelay with usleep_range
Date
According to Documentation/timers/timers-howto.rst, usleep_range is
preffered over udelay for >=10us delay.

Signed-off-by: Mayank Suman <mayanksuman@live.com>
---
drivers/staging/fbtft/fb_agm1264k-fl.c | 2 +-
drivers/staging/fbtft/fb_ra8875.c | 4 ++--
drivers/staging/fbtft/fb_tinylcd.c | 4 ++--
drivers/staging/fbtft/fb_upd161704.c | 18 +++++++++---------
drivers/staging/fbtft/fb_watterott.c | 4 ++--
5 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/staging/fbtft/fb_agm1264k-fl.c b/drivers/staging/fbtft/fb_agm1264k-fl.c
index eeeeec97a..9ac523511 100644
--- a/drivers/staging/fbtft/fb_agm1264k-fl.c
+++ b/drivers/staging/fbtft/fb_agm1264k-fl.c
@@ -85,7 +85,7 @@ static void reset(struct fbtft_par *par)
dev_dbg(par->info->device, "%s()\n", __func__);

gpiod_set_value(par->gpio.reset, 0);
- udelay(20);
+ usleep_range(20);
gpiod_set_value(par->gpio.reset, 1);
mdelay(120);
}
diff --git a/drivers/staging/fbtft/fb_ra8875.c b/drivers/staging/fbtft/fb_ra8875.c
index 398bdbf53..61d58efab 100644
--- a/drivers/staging/fbtft/fb_ra8875.c
+++ b/drivers/staging/fbtft/fb_ra8875.c
@@ -217,7 +217,7 @@ static void write_reg8_bus8(struct fbtft_par *par, int len, ...)
}
len--;

- udelay(100);
+ usleep_range(100);

if (len) {
buf = (u8 *)par->buf;
@@ -238,7 +238,7 @@ static void write_reg8_bus8(struct fbtft_par *par, int len, ...)

/* restore user spi-speed */
par->fbtftops.write = fbtft_write_spi;
- udelay(100);
+ usleep_range(100);
}

static int write_vmem16_bus8(struct fbtft_par *par, size_t offset, size_t len)
diff --git a/drivers/staging/fbtft/fb_tinylcd.c b/drivers/staging/fbtft/fb_tinylcd.c
index 9469248f2..fffd39d96 100644
--- a/drivers/staging/fbtft/fb_tinylcd.c
+++ b/drivers/staging/fbtft/fb_tinylcd.c
@@ -38,10 +38,10 @@ static int init_display(struct fbtft_par *par)
write_reg(par, 0xE5, 0x00);
write_reg(par, 0xF0, 0x36, 0xA5, 0x53);
write_reg(par, 0xE0, 0x00, 0x35, 0x33, 0x00, 0x00, 0x00,
- 0x00, 0x35, 0x33, 0x00, 0x00, 0x00);
+ 0x00, 0x35, 0x33, 0x00, 0x00, 0x00);
write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, 0x55);
write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE);
- udelay(250);
+ usleep_range(250);
write_reg(par, MIPI_DCS_SET_DISPLAY_ON);

return 0;
diff --git a/drivers/staging/fbtft/fb_upd161704.c b/drivers/staging/fbtft/fb_upd161704.c
index c77832ae5..bdcfda868 100644
--- a/drivers/staging/fbtft/fb_upd161704.c
+++ b/drivers/staging/fbtft/fb_upd161704.c
@@ -36,27 +36,27 @@ static int init_display(struct fbtft_par *par)

/* oscillator start */
write_reg(par, 0x003A, 0x0001); /*Oscillator 0: stop, 1: operation */
- udelay(100);
+ usleep_range(100);

/* y-setting */
write_reg(par, 0x0024, 0x007B); /* amplitude setting */
- udelay(10);
+ usleep_range(10);
write_reg(par, 0x0025, 0x003B); /* amplitude setting */
write_reg(par, 0x0026, 0x0034); /* amplitude setting */
- udelay(10);
+ usleep_range(10);
write_reg(par, 0x0027, 0x0004); /* amplitude setting */
write_reg(par, 0x0052, 0x0025); /* circuit setting 1 */
- udelay(10);
+ usleep_range(10);
write_reg(par, 0x0053, 0x0033); /* circuit setting 2 */
write_reg(par, 0x0061, 0x001C); /* adjustment V10 positive polarity */
- udelay(10);
+ usleep_range(10);
write_reg(par, 0x0062, 0x002C); /* adjustment V9 negative polarity */
write_reg(par, 0x0063, 0x0022); /* adjustment V34 positive polarity */
- udelay(10);
+ usleep_range(10);
write_reg(par, 0x0064, 0x0027); /* adjustment V31 negative polarity */
- udelay(10);
+ usleep_range(10);
write_reg(par, 0x0065, 0x0014); /* adjustment V61 negative polarity */
- udelay(10);
+ usleep_range(10);
write_reg(par, 0x0066, 0x0010); /* adjustment V61 negative polarity */

/* Basical clock for 1 line (BASECOUNT[7:0]) number specified */
@@ -64,7 +64,7 @@ static int init_display(struct fbtft_par *par)

/* Power supply setting */
write_reg(par, 0x0019, 0x0000); /* DC/DC output setting */
- udelay(200);
+ usleep_range(200);
write_reg(par, 0x001A, 0x1000); /* DC/DC frequency setting */
write_reg(par, 0x001B, 0x0023); /* DC/DC rising setting */
write_reg(par, 0x001C, 0x0C01); /* Regulator voltage setting */
diff --git a/drivers/staging/fbtft/fb_watterott.c b/drivers/staging/fbtft/fb_watterott.c
index 76b25df37..580d5329e 100644
--- a/drivers/staging/fbtft/fb_watterott.c
+++ b/drivers/staging/fbtft/fb_watterott.c
@@ -84,7 +84,7 @@ static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
par->txbuf.buf, 10 + par->info->fix.line_length);
if (ret < 0)
return ret;
- udelay(300);
+ usleep_range(300);
}

return 0;
@@ -124,7 +124,7 @@ static int write_vmem_8bit(struct fbtft_par *par, size_t offset, size_t len)
par->txbuf.buf, 10 + par->info->var.xres);
if (ret < 0)
return ret;
- udelay(700);
+ usleep_range(700);
}

return 0;
--
2.30.0
\
 
 \ /
  Last update: 2021-02-05 10:17    [W:0.067 / U:2.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site