lkml.org 
[lkml]   [2021]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 2/4] drm_dp_mst_topology: use correct AUX channel
On Thu, 4 Feb 2021 at 21:19, Hans Verkuil <hverkuil@xs4all.nl> wrote:
>
> On 01/02/2021 23:13, Ville Syrjälä wrote:
> > On Wed, Sep 23, 2020 at 12:13:53PM +1000, Sam McNally wrote:
> >> From: Hans Verkuil <hans.verkuil@cisco.com>
> >>
> >> For adapters behind an MST hub use the correct AUX channel.
> >>
> >> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
> >> [sammc@chromium.org: rebased, removing redundant changes]
> >> Signed-off-by: Sam McNally <sammc@chromium.org>
> >> ---
> >>
> >> (no changes since v1)
> >>
> >> drivers/gpu/drm/drm_dp_mst_topology.c | 36 +++++++++++++++++++++++++++
> >> 1 file changed, 36 insertions(+)
> >>
> >> diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
> >> index 15b6cc39a754..0d753201adbd 100644
> >> --- a/drivers/gpu/drm/drm_dp_mst_topology.c
> >> +++ b/drivers/gpu/drm/drm_dp_mst_topology.c
> >> @@ -2255,6 +2255,9 @@ drm_dp_mst_topology_unlink_port(struct drm_dp_mst_topology_mgr *mgr,
> >> drm_dp_mst_topology_put_port(port);
> >> }
> >>
> >> +static ssize_t
> >> +drm_dp_mst_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg);
> >> +
> >> static struct drm_dp_mst_port *
> >> drm_dp_mst_add_port(struct drm_device *dev,
> >> struct drm_dp_mst_topology_mgr *mgr,
> >> @@ -2271,9 +2274,13 @@ drm_dp_mst_add_port(struct drm_device *dev,
> >> port->port_num = port_number;
> >> port->mgr = mgr;
> >> port->aux.name = "DPMST";
> >> + mutex_init(&port->aux.hw_mutex);
> >> + mutex_init(&port->aux.cec.lock);
> >> port->aux.dev = dev->dev;
> >> port->aux.is_remote = true;
> >>
> >> + port->aux.transfer = drm_dp_mst_aux_transfer;
> >> +
> >
> > This was supposed to be handled via higher levels checking for
> > is_remote==true.
>
> Ah, I suspect this patch can be dropped entirely: it predates commit 2f221a5efed4
> ("drm/dp_mst: Add MST support to DP DPCD R/W functions").
>
> It looks like that commit basically solved what this older patch attempts to do
> as well.
>
> Sam, can you test if it works without this patch?

It almost just works; drm_dp_cec uses whether aux.transfer is non-null
to filter out non-DP connectors. Using aux.is_remote as another signal
indicating a DP connector seems plausible. We can drop this patch.
Thanks all!
>
> Regards,
>
> Hans
>
> >
> >> /* initialize the MST downstream port's AUX crc work queue */
> >> drm_dp_remote_aux_init(&port->aux);
> >>
> >> @@ -3503,6 +3510,35 @@ static int drm_dp_send_up_ack_reply(struct drm_dp_mst_topology_mgr *mgr,
> >> return 0;
> >> }
> >>
> >> +static ssize_t
> >> +drm_dp_mst_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
> >> +{
> >> + struct drm_dp_mst_port *port =
> >> + container_of(aux, struct drm_dp_mst_port, aux);
> >> + int ret;
> >> +
> >> + switch (msg->request & ~DP_AUX_I2C_MOT) {
> >> + case DP_AUX_NATIVE_WRITE:
> >> + case DP_AUX_I2C_WRITE:
> >> + case DP_AUX_I2C_WRITE_STATUS_UPDATE:
> >> + ret = drm_dp_send_dpcd_write(port->mgr, port, msg->address,
> >> + msg->size, msg->buffer);
> >
> > That doesn't make sense to me. I2c writes and DPCD writes
> > are definitely not the same thing.
> >
> > aux->transfer is a very low level thing. I don't think it's the
> > correct level of abstraction for sideband.
> >
> >> + break;
> >> +
> >> + case DP_AUX_NATIVE_READ:
> >> + case DP_AUX_I2C_READ:
> >> + ret = drm_dp_send_dpcd_read(port->mgr, port, msg->address,
> >> + msg->size, msg->buffer);
> >> + break;
> >> +
> >> + default:
> >> + ret = -EINVAL;
> >> + break;
> >> + }
> >> +
> >> + return ret;
> >> +}
> >> +
> >> static int drm_dp_get_vc_payload_bw(u8 dp_link_bw, u8 dp_link_count)
> >> {
> >> if (dp_link_bw == 0 || dp_link_count == 0)
> >> --
> >> 2.28.0.681.g6f77f65b4e-goog
> >>
> >> _______________________________________________
> >> dri-devel mailing list
> >> dri-devel@lists.freedesktop.org
> >> https://lists.freedesktop.org/mailman/listinfo/dri-devel
> >
>

\
 
 \ /
  Last update: 2021-02-05 06:21    [W:0.069 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site