lkml.org 
[lkml]   [2021]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 2/4] drm_dp_mst_topology: use correct AUX channel
From
Date
On 05/02/2021 14:24, Ville Syrjälä wrote:
> On Fri, Feb 05, 2021 at 04:17:51PM +1100, Sam McNally wrote:
>> On Thu, 4 Feb 2021 at 21:19, Hans Verkuil <hverkuil@xs4all.nl> wrote:
>>>
>>> On 01/02/2021 23:13, Ville Syrjälä wrote:
>>>> On Wed, Sep 23, 2020 at 12:13:53PM +1000, Sam McNally wrote:
>>>>> From: Hans Verkuil <hans.verkuil@cisco.com>
>>>>>
>>>>> For adapters behind an MST hub use the correct AUX channel.
>>>>>
>>>>> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
>>>>> [sammc@chromium.org: rebased, removing redundant changes]
>>>>> Signed-off-by: Sam McNally <sammc@chromium.org>
>>>>> ---
>>>>>
>>>>> (no changes since v1)
>>>>>
>>>>> drivers/gpu/drm/drm_dp_mst_topology.c | 36 +++++++++++++++++++++++++++
>>>>> 1 file changed, 36 insertions(+)
>>>>>
>>>>> diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
>>>>> index 15b6cc39a754..0d753201adbd 100644
>>>>> --- a/drivers/gpu/drm/drm_dp_mst_topology.c
>>>>> +++ b/drivers/gpu/drm/drm_dp_mst_topology.c
>>>>> @@ -2255,6 +2255,9 @@ drm_dp_mst_topology_unlink_port(struct drm_dp_mst_topology_mgr *mgr,
>>>>> drm_dp_mst_topology_put_port(port);
>>>>> }
>>>>>
>>>>> +static ssize_t
>>>>> +drm_dp_mst_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg);
>>>>> +
>>>>> static struct drm_dp_mst_port *
>>>>> drm_dp_mst_add_port(struct drm_device *dev,
>>>>> struct drm_dp_mst_topology_mgr *mgr,
>>>>> @@ -2271,9 +2274,13 @@ drm_dp_mst_add_port(struct drm_device *dev,
>>>>> port->port_num = port_number;
>>>>> port->mgr = mgr;
>>>>> port->aux.name = "DPMST";
>>>>> + mutex_init(&port->aux.hw_mutex);
>>>>> + mutex_init(&port->aux.cec.lock);
>>>>> port->aux.dev = dev->dev;
>>>>> port->aux.is_remote = true;
>>>>>
>>>>> + port->aux.transfer = drm_dp_mst_aux_transfer;
>>>>> +
>>>>
>>>> This was supposed to be handled via higher levels checking for
>>>> is_remote==true.
>>>
>>> Ah, I suspect this patch can be dropped entirely: it predates commit 2f221a5efed4
>>> ("drm/dp_mst: Add MST support to DP DPCD R/W functions").
>>>
>>> It looks like that commit basically solved what this older patch attempts to do
>>> as well.
>>>
>>> Sam, can you test if it works without this patch?
>>
>> It almost just works; drm_dp_cec uses whether aux.transfer is non-null
>> to filter out non-DP connectors. Using aux.is_remote as another signal
>> indicating a DP connector seems plausible. We can drop this patch.
>
> Why would anyone even call this stuff on a non-DP connector?
> And where did they even get the struct drm_dp_aux to do so?

This check came in with commit 5ce70c799ac2 ("drm_dp_cec: check that aux
has a transfer function"). It seems nouveau and amdgpu specific.

A better approach would be to fix those drivers to only call these cec
functions for DP outputs. I think I moved the test to drm_dp_cec.c primarily
for robustness (i.e. do nothing if called for a non-DP output). But that
might not be the right approach after all.

Regards,

Hans

>
>> Thanks all!
>>>
>>> Regards,
>>>
>>> Hans
>>>
>>>>
>>>>> /* initialize the MST downstream port's AUX crc work queue */
>>>>> drm_dp_remote_aux_init(&port->aux);
>>>>>
>>>>> @@ -3503,6 +3510,35 @@ static int drm_dp_send_up_ack_reply(struct drm_dp_mst_topology_mgr *mgr,
>>>>> return 0;
>>>>> }
>>>>>
>>>>> +static ssize_t
>>>>> +drm_dp_mst_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
>>>>> +{
>>>>> + struct drm_dp_mst_port *port =
>>>>> + container_of(aux, struct drm_dp_mst_port, aux);
>>>>> + int ret;
>>>>> +
>>>>> + switch (msg->request & ~DP_AUX_I2C_MOT) {
>>>>> + case DP_AUX_NATIVE_WRITE:
>>>>> + case DP_AUX_I2C_WRITE:
>>>>> + case DP_AUX_I2C_WRITE_STATUS_UPDATE:
>>>>> + ret = drm_dp_send_dpcd_write(port->mgr, port, msg->address,
>>>>> + msg->size, msg->buffer);
>>>>
>>>> That doesn't make sense to me. I2c writes and DPCD writes
>>>> are definitely not the same thing.
>>>>
>>>> aux->transfer is a very low level thing. I don't think it's the
>>>> correct level of abstraction for sideband.
>>>>
>>>>> + break;
>>>>> +
>>>>> + case DP_AUX_NATIVE_READ:
>>>>> + case DP_AUX_I2C_READ:
>>>>> + ret = drm_dp_send_dpcd_read(port->mgr, port, msg->address,
>>>>> + msg->size, msg->buffer);
>>>>> + break;
>>>>> +
>>>>> + default:
>>>>> + ret = -EINVAL;
>>>>> + break;
>>>>> + }
>>>>> +
>>>>> + return ret;
>>>>> +}
>>>>> +
>>>>> static int drm_dp_get_vc_payload_bw(u8 dp_link_bw, u8 dp_link_count)
>>>>> {
>>>>> if (dp_link_bw == 0 || dp_link_count == 0)
>>>>> --
>>>>> 2.28.0.681.g6f77f65b4e-goog
>>>>>
>>>>> _______________________________________________
>>>>> dri-devel mailing list
>>>>> dri-devel@lists.freedesktop.org
>>>>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>>>>
>>>
>

\
 
 \ /
  Last update: 2021-02-06 01:08    [W:0.120 / U:3.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site