lkml.org 
[lkml]   [2021]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/4] drm_dp_mst_topology: use correct AUX channel
On Fri, Feb 05, 2021 at 02:46:44PM +0100, Hans Verkuil wrote:
> On 05/02/2021 14:24, Ville Syrjälä wrote:
> > On Fri, Feb 05, 2021 at 04:17:51PM +1100, Sam McNally wrote:
> >> On Thu, 4 Feb 2021 at 21:19, Hans Verkuil <hverkuil@xs4all.nl> wrote:
> >>>
> >>> On 01/02/2021 23:13, Ville Syrjälä wrote:
> >>>> On Wed, Sep 23, 2020 at 12:13:53PM +1000, Sam McNally wrote:
> >>>>> From: Hans Verkuil <hans.verkuil@cisco.com>
> >>>>>
> >>>>> For adapters behind an MST hub use the correct AUX channel.
> >>>>>
> >>>>> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
> >>>>> [sammc@chromium.org: rebased, removing redundant changes]
> >>>>> Signed-off-by: Sam McNally <sammc@chromium.org>
> >>>>> ---
> >>>>>
> >>>>> (no changes since v1)
> >>>>>
> >>>>> drivers/gpu/drm/drm_dp_mst_topology.c | 36 +++++++++++++++++++++++++++
> >>>>> 1 file changed, 36 insertions(+)
> >>>>>
> >>>>> diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
> >>>>> index 15b6cc39a754..0d753201adbd 100644
> >>>>> --- a/drivers/gpu/drm/drm_dp_mst_topology.c
> >>>>> +++ b/drivers/gpu/drm/drm_dp_mst_topology.c
> >>>>> @@ -2255,6 +2255,9 @@ drm_dp_mst_topology_unlink_port(struct drm_dp_mst_topology_mgr *mgr,
> >>>>> drm_dp_mst_topology_put_port(port);
> >>>>> }
> >>>>>
> >>>>> +static ssize_t
> >>>>> +drm_dp_mst_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg);
> >>>>> +
> >>>>> static struct drm_dp_mst_port *
> >>>>> drm_dp_mst_add_port(struct drm_device *dev,
> >>>>> struct drm_dp_mst_topology_mgr *mgr,
> >>>>> @@ -2271,9 +2274,13 @@ drm_dp_mst_add_port(struct drm_device *dev,
> >>>>> port->port_num = port_number;
> >>>>> port->mgr = mgr;
> >>>>> port->aux.name = "DPMST";
> >>>>> + mutex_init(&port->aux.hw_mutex);
> >>>>> + mutex_init(&port->aux.cec.lock);
> >>>>> port->aux.dev = dev->dev;
> >>>>> port->aux.is_remote = true;
> >>>>>
> >>>>> + port->aux.transfer = drm_dp_mst_aux_transfer;
> >>>>> +
> >>>>
> >>>> This was supposed to be handled via higher levels checking for
> >>>> is_remote==true.
> >>>
> >>> Ah, I suspect this patch can be dropped entirely: it predates commit 2f221a5efed4
> >>> ("drm/dp_mst: Add MST support to DP DPCD R/W functions").
> >>>
> >>> It looks like that commit basically solved what this older patch attempts to do
> >>> as well.
> >>>
> >>> Sam, can you test if it works without this patch?
> >>
> >> It almost just works; drm_dp_cec uses whether aux.transfer is non-null
> >> to filter out non-DP connectors. Using aux.is_remote as another signal
> >> indicating a DP connector seems plausible. We can drop this patch.
> >
> > Why would anyone even call this stuff on a non-DP connector?
> > And where did they even get the struct drm_dp_aux to do so?
>
> This check came in with commit 5ce70c799ac2 ("drm_dp_cec: check that aux
> has a transfer function"). It seems nouveau and amdgpu specific.

I see.

>
> A better approach would be to fix those drivers to only call these cec
> functions for DP outputs. I think I moved the test to drm_dp_cec.c primarily
> for robustness (i.e. do nothing if called for a non-DP output). But that
> might not be the right approach after all.

Shrug. I guess just extending to check is_remote (or maybe there is
some other member that's always set?) is a good enough short term
solution. Someone may want to have a look at adjusting
amdgpu/nouveau to not need it, but who knows how much work that is.

--
Ville Syrjälä
Intel

\
 
 \ /
  Last update: 2021-02-06 00:58    [W:0.128 / U:0.908 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site