lkml.org 
[lkml]   [2021]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/6] arm64: dts: qcom: sm8350: add USB and PHY device nodes
Hi Vinod,

On Thu, Feb 04, 2021 at 10:39:03PM +0530, Vinod Koul wrote:
> From: Jack Pham <jackp@codeaurora.org>
>
> Add device nodes for the two instances each of USB3 controllers,
> QMP SS PHYs and SNPS HS PHYs.
>
> Signed-off-by: Jack Pham <jackp@codeaurora.org>
> Message-Id: <20210116013802.1609-2-jackp@codeaurora.org>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
> arch/arm64/boot/dts/qcom/sm8350.dtsi | 179 +++++++++++++++++++++++++++
> 1 file changed, 179 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> index e3597e2a22ab..e51d9ca0210c 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> @@ -592,6 +592,185 @@ rpmhcc: clock-controller {
> };
>
> };
> +
> + usb_1_hsphy: phy@88e3000 {
> + compatible = "qcom,sm8350-usb-hs-phy",
> + "qcom,usb-snps-hs-7nm-phy";
> + reg = <0 0x088e3000 0 0x400>;
> + status = "disabled";
> + #phy-cells = <0>;
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "ref";
> +
> + resets = <&gcc 20>;

Shouldn't this (and all the other gcc phandles below) use the
dt-bindings macros from here?
https://patchwork.kernel.org/project/linux-arm-msm/patch/20210118044321.2571775-5-vkoul@kernel.org/

Jack
--
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2021-02-04 19:08    [W:1.990 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site