lkml.org 
[lkml]   [2021]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH] dt-bindings: pinctrl: Group tuples in pin control properties
    Date
    To improve human readability and enable automatic validation, the tuples
    in "pinctrl-*" properties should be grouped using angle brackets.

    Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
    ---
    .../devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt | 2 +-
    .../devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt | 2 +-
    .../devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt | 2 +-
    .../devicetree/bindings/pinctrl/pinctrl-bindings.txt | 4 ++--
    .../devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt | 2 +-
    .../devicetree/bindings/pinctrl/pinctrl-mt65xx.txt | 2 +-
    .../devicetree/bindings/pinctrl/pinctrl-single.txt | 10 +++++-----
    .../devicetree/bindings/pinctrl/samsung-pinctrl.txt | 2 +-
    8 files changed, 13 insertions(+), 13 deletions(-)

    diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt
    index e295dda4bbbab958..40e0a9a19525b40d 100644
    --- a/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt
    +++ b/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt
    @@ -39,7 +39,7 @@ For example:
    <0x660009b0 0x40>;

    pinctrl-names = "default";
    - pinctrl-0 = <&nand_sel &uart3_rx &sdio0_d4>;
    + pinctrl-0 = <&nand_sel>, <&uart3_rx>, <&sdio0_d4>;

    /* Select nand function */
    nand_sel: nand_sel {
    diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt
    index 603564e5fe6f0e54..dede11e4ef78087f 100644
    --- a/Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt
    +++ b/Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt
    @@ -30,7 +30,7 @@ For example:
    <0x1803f408 0x04>;

    pinctrl-names = "default";
    - pinctrl-0 = <&pwm &gpio_b &nand_sel>;
    + pinctrl-0 = <&pwm>, <&gpio_b>, <&nand_sel>;

    pwm: pwm {
    function = "pwm";
    diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
    index 8ac1d0851a0f8f0a..bfab5ca49fd1211a 100644
    --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
    +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
    @@ -60,7 +60,7 @@ iomuxc-lpsr controller and SDA pad from iomuxc controller as:

    i2c1: i2c@30a20000 {
    pinctrl-names = "default";
    - pinctrl-0 = <&pinctrl_i2c1_1 &pinctrl_i2c1_2>;
    + pinctrl-0 = <&pinctrl_i2c1_1>, <&pinctrl_i2c1_2>;
    };

    iomuxc-lpsr@302c0000 {
    diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
    index 4613bb17ace3f6e1..9dae60acf950641d 100644
    --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
    +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
    @@ -77,13 +77,13 @@ For example:
    device {
    pinctrl-names = "active", "idle";
    pinctrl-0 = <&state_0_node_a>;
    - pinctrl-1 = <&state_1_node_a &state_1_node_b>;
    + pinctrl-1 = <&state_1_node_a>, <&state_1_node_b>;
    };

    /* For the same device if using state IDs */
    device {
    pinctrl-0 = <&state_0_node_a>;
    - pinctrl-1 = <&state_1_node_a &state_1_node_b>;
    + pinctrl-1 = <&state_1_node_a>, <&state_1_node_b>;
    };

    /*
    diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
    index 8b94aa8f5971ceb7..6ec3c8d79f496b52 100644
    --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
    +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
    @@ -134,7 +134,7 @@ gpio21: gpio@21 {
    #interrupt-cells = <0x2>;
    microchip,irq-mirror;
    pinctrl-names = "default";
    - pinctrl-0 = <&i2cgpio0irq &gpio21pullups>;
    + pinctrl-0 = <&i2cgpio0irq>, <&gpio21pullups>;

    gpio21pullups: pinmux {
    pins = "gpio0", "gpio1", "gpio2", "gpio3",
    diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
    index 931a18cd1e238e6c..360e59c9301a93a8 100644
    --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
    +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
    @@ -91,7 +91,7 @@ Examples:
    pinctrl@1c20800 {
    compatible = "mediatek,mt8135-pinctrl";
    reg = <0 0x1000B000 0 0x1000>;
    - mediatek,pctl-regmap = <&syscfg_pctl_a &syscfg_pctl_b>;
    + mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>;
    pins-are-numbered;
    gpio-controller;
    #gpio-cells = <2>;
    diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
    index bb99991193148cb2..bfd222b0549569df 100644
    --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
    +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
    @@ -80,7 +80,7 @@ Optional properties:
    property.

    /* pin base, nr pins & gpio function */
    - pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1>;
    + pinctrl-single,gpio-range = <&range 0 3 0>, <&range 3 9 1>;

    - interrupt-controller : standard interrupt controller binding if using
    interrupts for wake-up events for example. In this case pinctrl-single
    @@ -185,10 +185,10 @@ pmx_gpio: pinmux@d401e000 {
    pinctrl-single,function-mask = <7>;

    /* sparse GPIO range could be supported */
    - pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1
    - &range 12 1 0 &range 13 29 1
    - &range 43 1 0 &range 44 49 1
    - &range 94 1 1 &range 96 2 1>;
    + pinctrl-single,gpio-range = <&range 0 3 0>, <&range 3 9 1>,
    + <&range 12 1 0>, <&range 13 29 1>,
    + <&range 43 1 0>, <&range 44 49 1>,
    + <&range 94 1 1>, <&range 96 2 1>;

    range: gpio-range {
    #pinctrl-single,gpio-range-cells = <3>;
    diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
    index 7734ab6fec449471..38a1416fd2cd8e1a 100644
    --- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
    +++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
    @@ -336,7 +336,7 @@ Example 3: A uart client node that supports 'default' and 'flow-control' states.
    interrupts = <0 52 0>;
    pinctrl-names = "default", "flow-control;
    pinctrl-0 = <&uart0_data>;
    - pinctrl-1 = <&uart0_data &uart0_fctl>;
    + pinctrl-1 = <&uart0_data>, <&uart0_fctl>;
    };

    Example 4: Set up the default pin state for uart controller.
    --
    2.25.1
    \
     
     \ /
      Last update: 2021-02-04 19:07    [W:3.500 / U:1.328 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site