lkml.org 
[lkml]   [2021]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] vdpa/mlx5: Restore the hardware used index after change map
On Wed, Feb 03, 2021 at 12:33:26PM -0800, Si-Wei Liu wrote:
> On Tue, Feb 2, 2021 at 10:48 PM Eli Cohen <elic@nvidia.com> wrote:
> >
> > On Tue, Feb 02, 2021 at 09:14:02AM -0800, Si-Wei Liu wrote:
> > > On Tue, Feb 2, 2021 at 6:34 AM Eli Cohen <elic@nvidia.com> wrote:
> > > >
> > > > When a change of memory map occurs, the hardware resources are destroyed
> > > > and then re-created again with the new memory map. In such case, we need
> > > > to restore the hardware available and used indices. The driver failed to
> > > > restore the used index which is added here.
> > > >
> > > > Fixes 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
> > > > Signed-off-by: Eli Cohen <elic@nvidia.com>
> > > > ---
> > > > This patch is being sent again a single patch the fixes hot memory
> > > > addtion to a qemy process.
> > > >
> > > > drivers/vdpa/mlx5/net/mlx5_vnet.c | 7 +++++++
> > > > 1 file changed, 7 insertions(+)
> > > >
> > > > diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> > > > index 88dde3455bfd..839f57c64a6f 100644
> > > > --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
> > > > +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> > > > @@ -87,6 +87,7 @@ struct mlx5_vq_restore_info {
> > > > u64 device_addr;
> > > > u64 driver_addr;
> > > > u16 avail_index;
> > > > + u16 used_index;
> > > > bool ready;
> > > > struct vdpa_callback cb;
> > > > bool restore;
> > > > @@ -121,6 +122,7 @@ struct mlx5_vdpa_virtqueue {
> > > > u32 virtq_id;
> > > > struct mlx5_vdpa_net *ndev;
> > > > u16 avail_idx;
> > > > + u16 used_idx;
> > > > int fw_state;
> > > >
> > > > /* keep last in the struct */
> > > > @@ -804,6 +806,7 @@ static int create_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtque
> > > >
> > > > obj_context = MLX5_ADDR_OF(create_virtio_net_q_in, in, obj_context);
> > > > MLX5_SET(virtio_net_q_object, obj_context, hw_available_index, mvq->avail_idx);
> > > > + MLX5_SET(virtio_net_q_object, obj_context, hw_used_index, mvq->used_idx);
> > >
> > > The saved indexes will apply to the new virtqueue object whenever it
> > > is created. In virtio spec, these indexes will reset back to zero when
> > > the virtio device is reset. But I don't see how it's done today. IOW,
> > > I don't see where avail_idx and used_idx get cleared from the mvq for
> > > device reset via set_status().
> > >
> >
> > Right, but this is not strictly related to this patch. I will post
> > another patch to fix this.
>
> Better to post these two patches in a series.Or else it may cause VM
> reboot problem as that is where the device gets reset. The avail_index
> did not as the correct value will be written to by driver right after,
> but used_idx introduced by this patch is supplied by device hence this
> patch alone would introduce regression.
>

OK, will do.

> >
> > BTW, can you describe a secnario that would cause a reset (through
> > calling set_status()) that happens after the VQ has been used?
>
> You can try reboot the guest, that'll be the easy way to test.
>

Thanks!

> -Siwei
>
> >
> > > -Siwei
> > >
> > >
> > > > MLX5_SET(virtio_net_q_object, obj_context, queue_feature_bit_mask_12_3,
> > > > get_features_12_3(ndev->mvdev.actual_features));
> > > > vq_ctx = MLX5_ADDR_OF(virtio_net_q_object, obj_context, virtio_q_context);
> > > > @@ -1022,6 +1025,7 @@ static int connect_qps(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueue *m
> > > > struct mlx5_virtq_attr {
> > > > u8 state;
> > > > u16 available_index;
> > > > + u16 used_index;
> > > > };
> > > >
> > > > static int query_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueue *mvq,
> > > > @@ -1052,6 +1056,7 @@ static int query_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueu
> > > > memset(attr, 0, sizeof(*attr));
> > > > attr->state = MLX5_GET(virtio_net_q_object, obj_context, state);
> > > > attr->available_index = MLX5_GET(virtio_net_q_object, obj_context, hw_available_index);
> > > > + attr->used_index = MLX5_GET(virtio_net_q_object, obj_context, hw_used_index);
> > > > kfree(out);
> > > > return 0;
> > > >
> > > > @@ -1610,6 +1615,7 @@ static int save_channel_info(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqu
> > > > return err;
> > > >
> > > > ri->avail_index = attr.available_index;
> > > > + ri->used_index = attr.used_index;
> > > > ri->ready = mvq->ready;
> > > > ri->num_ent = mvq->num_ent;
> > > > ri->desc_addr = mvq->desc_addr;
> > > > @@ -1654,6 +1660,7 @@ static void restore_channels_info(struct mlx5_vdpa_net *ndev)
> > > > continue;
> > > >
> > > > mvq->avail_idx = ri->avail_index;
> > > > + mvq->used_idx = ri->used_index;
> > > > mvq->ready = ri->ready;
> > > > mvq->num_ent = ri->num_ent;
> > > > mvq->desc_addr = ri->desc_addr;
> > > > --
> > > > 2.29.2
> > > >

\
 
 \ /
  Last update: 2021-02-04 08:09    [W:0.108 / U:1.668 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site