lkml.org 
[lkml]   [2021]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 2/2] irqchip: Add support for Realtek RTL838x/RTL839x interrupt controller
From
Date

On 22.01.21 21:42, Bert Vermeulen wrote:
> This is a standard IRQ driver with only status and mask registers.
>
> The mapping from SoC interrupts (18-31) to MIPS core interrupts is
> done via an interrupt-map in device tree.
>
> Signed-off-by: Bert Vermeulen <bert@biot.com>
> Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>

Acked-by: John Crispin <john@phrozen.org>

Thanks !

> ---
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-realtek-rtl.c | 180 ++++++++++++++++++++++++++++++
> 2 files changed, 181 insertions(+)
> create mode 100644 drivers/irqchip/irq-realtek-rtl.c
>
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index 0ac93bfaec61..4fc1086bed7e 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -113,3 +113,4 @@ obj-$(CONFIG_LOONGSON_PCH_PIC) += irq-loongson-pch-pic.o
> obj-$(CONFIG_LOONGSON_PCH_MSI) += irq-loongson-pch-msi.o
> obj-$(CONFIG_MST_IRQ) += irq-mst-intc.o
> obj-$(CONFIG_SL28CPLD_INTC) += irq-sl28cpld.o
> +obj-$(CONFIG_MACH_REALTEK_RTL) += irq-realtek-rtl.o
> diff --git a/drivers/irqchip/irq-realtek-rtl.c b/drivers/irqchip/irq-realtek-rtl.c
> new file mode 100644
> index 000000000000..b57c67dfab5b
> --- /dev/null
> +++ b/drivers/irqchip/irq-realtek-rtl.c
> @@ -0,0 +1,180 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 Birger Koblitz <mail@birger-koblitz.de>
> + * Copyright (C) 2020 Bert Vermeulen <bert@biot.com>
> + * Copyright (C) 2020 John Crispin <john@phrozen.org>
> + */
> +
> +#include <linux/of_irq.h>
> +#include <linux/irqchip.h>
> +#include <linux/spinlock.h>
> +#include <linux/of_address.h>
> +#include <linux/irqchip/chained_irq.h>
> +
> +/* Global Interrupt Mask Register */
> +#define RTL_ICTL_GIMR 0x00
> +/* Global Interrupt Status Register */
> +#define RTL_ICTL_GISR 0x04
> +/* Interrupt Routing Registers */
> +#define RTL_ICTL_IRR0 0x08
> +#define RTL_ICTL_IRR1 0x0c
> +#define RTL_ICTL_IRR2 0x10
> +#define RTL_ICTL_IRR3 0x14
> +
> +#define REG(x) (realtek_ictl_base + x)
> +
> +static DEFINE_RAW_SPINLOCK(irq_lock);
> +static void __iomem *realtek_ictl_base;
> +
> +static void realtek_ictl_unmask_irq(struct irq_data *i)
> +{
> + unsigned long flags;
> + u32 value;
> +
> + raw_spin_lock_irqsave(&irq_lock, flags);
> +
> + value = readl(REG(RTL_ICTL_GIMR));
> + value |= BIT(i->hwirq);
> + writel(value, REG(RTL_ICTL_GIMR));
> +
> + raw_spin_unlock_irqrestore(&irq_lock, flags);
> +}
> +
> +static void realtek_ictl_mask_irq(struct irq_data *i)
> +{
> + unsigned long flags;
> + u32 value;
> +
> + raw_spin_lock_irqsave(&irq_lock, flags);
> +
> + value = readl(REG(RTL_ICTL_GIMR));
> + value &= ~BIT(i->hwirq);
> + writel(value, REG(RTL_ICTL_GIMR));
> +
> + raw_spin_unlock_irqrestore(&irq_lock, flags);
> +}
> +
> +static struct irq_chip realtek_ictl_irq = {
> + .name = "realtek-rtl-intc",
> + .irq_mask = realtek_ictl_mask_irq,
> + .irq_unmask = realtek_ictl_unmask_irq,
> +};
> +
> +static int intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
> +{
> + irq_set_chip_and_handler(hw, &realtek_ictl_irq, handle_level_irq);
> +
> + return 0;
> +}
> +
> +static const struct irq_domain_ops irq_domain_ops = {
> + .map = intc_map,
> + .xlate = irq_domain_xlate_onecell,
> +};
> +
> +static void realtek_irq_dispatch(struct irq_desc *desc)
> +{
> + struct irq_chip *chip = irq_desc_get_chip(desc);
> + struct irq_domain *domain;
> + unsigned int pending;
> +
> + chained_irq_enter(chip, desc);
> + pending = readl(REG(RTL_ICTL_GIMR)) & readl(REG(RTL_ICTL_GISR));
> + if (unlikely(!pending)) {
> + spurious_interrupt();
> + goto out;
> + }
> + domain = irq_desc_get_handler_data(desc);
> + generic_handle_irq(irq_find_mapping(domain, __ffs(pending)));
> +
> +out:
> + chained_irq_exit(chip, desc);
> +}
> +
> +/*
> + * SoC interrupts are cascaded to MIPS CPU interrupts according to the
> + * interrupt-map in the device tree. Each SoC interrupt gets 4 bits for
> + * the CPU interrupt in an Interrupt Routing Register. Max 32 SoC interrupts
> + * thus go into 4 IRRs.
> + */
> +static int __init map_interrupts(struct device_node *node, struct irq_domain *domain)
> +{
> + struct device_node *cpu_ictl;
> + const __be32 *imap;
> + u32 imaplen, soc_int, cpu_int, tmp, regs[4];
> + int ret, i, irr_regs[] = {
> + RTL_ICTL_IRR3,
> + RTL_ICTL_IRR2,
> + RTL_ICTL_IRR1,
> + RTL_ICTL_IRR0,
> + };
> + u8 mips_irqs_set;
> +
> + ret = of_property_read_u32(node, "#address-cells", &tmp);
> + if (ret || tmp)
> + return -EINVAL;
> +
> + imap = of_get_property(node, "interrupt-map", &imaplen);
> + if (!imap || imaplen % 3)
> + return -EINVAL;
> +
> + mips_irqs_set = 0;
> + memset(regs, 0, sizeof(regs));
> + for (i = 0; i < imaplen; i += 3 * sizeof(u32)) {
> + soc_int = be32_to_cpup(imap);
> + if (soc_int > 31)
> + return -EINVAL;
> +
> + cpu_ictl = of_find_node_by_phandle(be32_to_cpup(imap + 1));
> + if (!cpu_ictl)
> + return -EINVAL;
> + ret = of_property_read_u32(cpu_ictl, "#interrupt-cells", &tmp);
> + if (ret || tmp != 1)
> + return -EINVAL;
> + of_node_put(cpu_ictl);
> +
> + cpu_int = be32_to_cpup(imap + 2);
> + if (cpu_int > 7)
> + return -EINVAL;
> +
> + if (!(mips_irqs_set & BIT(cpu_int))) {
> + irq_set_chained_handler_and_data(cpu_int, realtek_irq_dispatch,
> + domain);
> + mips_irqs_set |= BIT(cpu_int);
> + }
> +
> + regs[(soc_int * 4) / 32] |= cpu_int << (soc_int * 4) % 32;
> + imap += 3;
> + }
> +
> + for (i = 0; i < 4; i++)
> + writel(regs[i], REG(irr_regs[i]));
> +
> + return 0;
> +}
> +
> +static int __init realtek_rtl_of_init(struct device_node *node, struct device_node *parent)
> +{
> + struct irq_domain *domain;
> + int ret;
> +
> + realtek_ictl_base = of_iomap(node, 0);
> + if (!realtek_ictl_base)
> + return -ENXIO;
> +
> + /* Disable all cascaded interrupts */
> + writel(0, REG(RTL_ICTL_GIMR));
> +
> + domain = irq_domain_add_simple(node, 32, 0,
> + &irq_domain_ops, NULL);
> +
> + ret = map_interrupts(node, domain);
> + if (ret) {
> + pr_err("invalid interrupt map\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +IRQCHIP_DECLARE(realtek_rtl_intc, "realtek,rtl-intc", realtek_rtl_of_init);

\
 
 \ /
  Last update: 2021-02-04 09:43    [W:0.086 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site