lkml.org 
[lkml]   [2021]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] Revert "dts: phy: add GPIO number and active state used for phy reset"
Date
From
From: Palmer Dabbelt <palmerdabbelt@google.com>

VSC8541 phys need a special reset sequence, which the driver doesn't
currentlny support. As a result enabling the reset via GPIO essentially
guarnteees that the device won't work correctly.

This reverts commit a0fa9d727043da2238432471e85de0bdb8a8df65.

Fixes: a0fa9d727043 ("dts: phy: add GPIO number and active state used for phy reset")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
---
arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts | 1 -
1 file changed, 1 deletion(-)

diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
index 24d75a146e02..60846e88ae4b 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
@@ -90,7 +90,6 @@ &eth0 {
phy0: ethernet-phy@0 {
compatible = "ethernet-phy-id0007.0771";
reg = <0>;
- reset-gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
};

--
2.30.0.478.g8a0d178c01-goog
\
 
 \ /
  Last update: 2021-02-05 04:45    [W:0.091 / U:5.848 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site